This is a Direct Hire Authority (DHA) solicitation utilizing the DHA for Certain Personnel of the Department of Defense (DOD) Workforce to recruit and appoint qualified candidates to positions in the competitive service. About the Position: This position is located within the U.S. Army Installation Management Command, Directorate of Public Works, Operations & Maintenance Division, at Fort Leonard Wood, Missouri.

Duties

The following duties are at the full performance level and if selected at the lower level you will perform the duties with more than normal supervision. Read and interpret contract documents to determine contract requirements and performance standards. Read contractor work schedules and quality control reports to determine if contractor is on schedule and reporting satisfactorily. Serve as the Contracting Officer Representative (COR) for multiple service contracts. Perform on-site inspections of facilities and equipment and determine the condition of the plants and equipment. Perform customer services to include verification and resolution of customer complaints. Perform contract actions such as formulation of resolicitation packages and modification packages. Provide coordination between the customer, the contractor and the contracting officer.

Requirements

• Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
• Financial Disclosure Statement, OGE-450, (5CFR Part 2634, Subpart I USOGE, 6/08). Executive Branch Personnel Confidential Financial Disclosure Report upon entering the position and annually.
• A pre-employment physical will be required for this position. An annual physical examination or medical surveillance may be required.
• This position requires the employee drive a motor vehicle. An appropriate, valid driver's license is required and must be maintained for the position.
• Temporary duty (TDY) travel may be required up to 5% of the time.

Qualifications

Who May Apply: US Citizens In order to qualify, you must meet the education and/or experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Basic Requirement for all Engineer positions: Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. 3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. 4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. In addition to the Basic Requirements you must meet the Minimum Qualifications listed below For GS-07: Specialized Experience: One year of specialized experience which includes: 1) Assisting in reviewing contract requirements and performance standards; 2) Assisting in interpreting contract documents; and 3) Inspecting completed work to ensure compliance with contract requirements. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-05). OR Education: One full year of graduate level education in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position. OR Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) by 18. Add the two percentages.

Education

For GS-09: Specialized Experience: One year of specialized experience which includes: 1) Reviewing contract requirements and performance standards; 2) Interpreting contract documents; and 3) Inspecting completed work to ensure compliance with contract requirements. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-07).

OR

Education: Master's or equivalent graduate degree or 2 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position.

OR

Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the first year (total graduate semester hours minus 18) by 18. Add the two percentages.

OR

For GS-11: Specialized Experience: One year of specialized experience which includes: 1) Reviewing contract requirements and performance standards; 2) Interpreting contract documents; 3) Preparing modifications to contracts; and 4) Inspecting completed work to ensure compliance with contract requirements. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-09).

OR

Education: Ph.D. or equivalent doctoral degree or 3 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position.

OR

Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the second year (total graduate semester hours minus 36) by 18. Add the two percentages.

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: http://www.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html

Contacts

• Address KA-APF-W6B8AA US ARMY GARRISON FT LEONARD WOOD DO NOT MAIL Fort Leonardwood, MO 65473 US
• Name: Army Applicant Help Desk