This position is located with the Bureau of Indian Affairs, Eastern Region, Choctaw Agency, Branch of Transportation in Philadelphia, Mississippi. This is a Bargaining Unit position, for more information see What are bargaining units? NOTE: TRAVEL AND RELOCATION EXPENSES WILL BE AUTHORIZED IN ACCORDANCE WITH THE FEDERAL TRAVEL REGULATIONS.

Duties

*Serves as a Civil Engineer, to provide technical guidance to Tribes and other internal and external stakeholders for development of long-range plans, transportation facilities and road maintenance. *Serves as a Civil Engineer responsible to provide technical guidance to Tribes to establish short- and long-term transportation facility improvement goals based on long range transportation plans. *Monitors and manages transportation facility project plans that outline the scope, schedule, and budget to include engineering, construction, maintenance, permit compliance, and acquisition; changes to the project plans with tribes and external stakeholders, and ensure contractors comply with acquisition regulations (local/state/federal) and contract requirements. *Investigates, assess, and inspect transportation facilities to identify condition, deferred maintenance needs and structural deficiencies. *Reviews technical documentation such as technical reports, engineering study analyses and results, design criteria and standards, evaluation and oversight reports, inspection and assessment reviews, construction plans, specifications, and cost estimates for acceptance of contract deliverables.

Requirements

• U.S. Citizenship Required
• Preference in filling vacancies is given to qualified Indian candidates in accordance with the Indian Preference Act of 1934 (title 25, USC Section 472). Form BIA -4432 must be submitted with the application if claiming Indian Preference.
• You will be required to have federal payments made by Direct Deposit
• You may be required to successfully complete a probationary/trial period
• A background security investigation will be required for all new hires. Appointment will be subject to the applicant's successful completion of a background security investigation and favorable adjudication.
• If you are a male applicant born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency.
• Incidental Operator position. If you are required to operate a motor vehicle in order to properly carry out assigned duties, the 25 IAM 4 Motor Vehicle Safety Program Policy applies. A Link is provided in the Additional Information section.

Qualifications

EXPERIENCE AND EDUCATION REQUIREMENTS: (OPM Operating Manual, Qualification Standards for Professional and Scientific Positions, GS-800, Individual Occupational requirements for GS-800, All Professional Engineering Positions, GS-801). Basic Requirements for General Engineer, GS-0801: 1. Degree: professional engineering. To be acceptable, the curriculum must: (1) be in a school of engineering with at least one curriculum accredited by the Accreditation Board for Engineering and Technology (ABET) as a professional engineering curriculum; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR 2. Combination of education and experience--college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying professional engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration--Current registration as a professional engineer by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test- Evidence of having successfully passed the Engineer-in-Training (EIT) examination, or the written test required for professional registration, which is administered by the Boards of Engineering Examiners in the various States, the District of Columbia, Guam, and Puerto Rico. Applicants who have passed the EIT examination and have completed all the requirements for either (a) a bachelor's degree in engineering technology (BET) from an accredited college of university that included 60 semester hours of courses in the physical, mathematical, and engineering sciences, or (b) a BET from a program accredited by the Accreditation Board for Engineering and Technology (ABET) may be rated eligible for certain engineering positions at GS-5. Eligibility is limited to positions that are within or closely related to the specialty field of the engineering technology program. Applicants for positions that involve highly technical research, development, or similar functions requiring an advanced level of competence in basic science must meet the basic requirements in paragraph A. Because of the diversity in kind and quality of BET programs, graduates of other BET programs are required to complete at least 1 year of additional education or highly technical work experience of such nature as to provide reasonable assurance of the possession of the knowledge, skills, and abilities required for professional engineering competence. The adequacy of this background must be demonstrated by passing the EIT examination. 3. Specified academic courses--Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements. The courses must be fully acceptable toward meeting the requirements of a professional engineering curriculum as described in paragraph A. 4. Related curriculum--Successful completion of a curriculum leading to a bachelor's degree in engineering technology or in an appropriate professional field, e.g., physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.) ADDITIONAL EXPERIENCE REQUIRED: In addition to meeting the basic entry level qualification requirements, applicants must have the following: GS-12: I have at least 1 year of specialized experience or the equivalent, comparable to at least the GS-11 in the Federal Service (obtained in either the public or private sector). Specialized experience includes efficient and effective stewardships of resources for new construction of highways, bridges, reinforced concrete culvert, and other drainage structures; conduct preliminary site visits, construction inspections, and project coordination meetings with stakeholders including design professionals, government officials, and transportation end users; experience in theories, principles, practices and techniques of highway, transportation and traffic engineering; provide technical assistance to tribes in engineering design and in construction contract management; responsible for administration of transportation management and safety program activities. All qualification requirements must be met by the closing date of this announcement. Merit Promotion candidates must also meet time-in-grade requirements by the announcement closing date. Preference in filling vacancies is given to qualified Indian candidates in accordance with the Indian Preference Act of 1934 (title 25, USC Section 472). Additional selections may be made from this announcement if identical vacancies occur in the same location within 90 days from the closing date.

Education

If you are qualifying based on your education, you MUST provide transcripts or other documentation to support your educational claims. Unless otherwise stated: (1) official or unofficial transcripts are acceptable, or (2) you may submit a list with all of your courses, grades, semester, year, and credit for the course. All materials must be submitted by the closing date of the announcement.

If more than 10 percent of your undergraduate course work (credit hours) were taken on a pass/fail basis, your claim of superior academic achievement must be based upon class standing or membership in an honor society.

One academic year of graduate education is considered to be the number of credits hours your graduate school has determined to represent one academic year of full-time study. Such study may have been performed on a full-time or part-time basis. If you cannot obtain your graduate school's definition of one year of graduate study, 18 semester hours (or 27 quarter hours) should be considered as satisfying the requirement for one year of full-time graduate study.

If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must send a Certificate of Foreign Equivalency with your transcript in order to receive credit for that education which shows the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: FOREIGN EDUCATION

Contacts

• Address BIA Center for Recruitment Anadarko P.O. Box 1487 Anadarko, OK 73005 US
• Name: BIA Human Resources
• Phone: 405-247-1600
• Email: [email protected]