THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION. This National Guard position is for a TOOLS AND PARTS ATTENDANT, Position Description Number D1228000 and is part of the DE Field Maintenance Shop 3, National Guard.

Duties

1) Identifies user's tools, parts, equipment, and requirements and requisitions stock as needed. Watches and reports items that are in short supply because of breakage or because they are frequently out for repair. Recommends possible substitute or interchangeable items. Sets up and maintains storage locations. Determines methods of storage, identification, and stock location, considering such factors as temperature, humidity, height and weight limits, turnover, floor loading capacities, space available, and convenience of handling items. Compiles records concerned with quantity, cost, and type of material received, stored, and issued. (2) Prepares periodic inventory and determines the basis for over, short, or misplaced items by checking such references as out-for repair, issue, and turn-in records maintained in the tools and parts room. Compiles reports of use of stock handling equipment, adjustments of inventory counts and stock records, spoilage of or damage to stock, location changes, and refusal of shipments. (3) Ensures that tools and equipment are maintained in good condition by performing visual and operating checks, taking measurements with such devices as calipers, and receiving reports from users on the nature and extent of damage to tools and equipment. May make minor repairs to tools and equipment, determine when damaged and inoperative items are too costly to repair, and report damaged or worn-out equipment to superiors. (4) Determines stock replenishment levels for centrally controlled supplies and other material within funding limitations. Assures that supplies and monies are not wasted through excess accumulation, and that items are on hand in sufficient quantities and at the time required. In addition to established guides and formulas, determines quantities required and timely stock replenishment. (5) Receives a wide variety of supplies and specialized items requiring special handling. Ensures that received items are properly stored in assigned locations. Reviews requisitions for completeness and compliance with regulations, and revises quantities ordered based on number on hand. Recommends substitution when supply items are not available. (6) Searches for identifying or management data on items of supply. Compares data listed on documents with reference sources such as federal catalogs, stock lists, or other publications. Receives requests desiring additional identification data, verification, or comparison of data on hand with reference sources. Searches for stock number, prices, descriptions, sources of supply, or other management data. When unknown, traces part number or type number and manufacturer of the item of equipment. (7) Edits supply transactions, or provides customer service for urgent critical shortage items and other items requiring special handling when established procedures are not applicable. Codes and classifies requisitions, shipping orders, and other documents, and extracts requests to other sources of supply or refers them to an inventory control point when stock is unavailable or cannot be shipped. (8) May assist a Surface Maintenance Mechanic by performing the less complex and more routine helper type duties. May perform maintenance tasks with repairers or mechanics by assisting in the accomplishment of duties. This may involve getting tools and supplies, carrying materials, and lifting and holding materials in place during operations. As directed by the repairer or mechanic, uses hand and powered tools of the trade to assist in the disassembly, assembly, and installation of simple component parts and units. Applies knowledge gained from previous work assignments. Detailed instructions are received from the higher graded Surface Maintenance Mechanic with each new assignment. Work is reviewed by the higher-level employee while in progress and upon completion. Cleans tools, parts, and equipment and keeps work areas clean and orderly. (9) Performs other duties as assigned.

Requirements

• NATIONAL GUARD MEMBERSHIP IS REQUIRED. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position.
• This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard, required prior to the effective date of placement.
• Selectee will be required to wear the military uniform.
• Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment.
• Applicants who are not currently a member of the National Guard must be eligible for immediate membership and employment in the National Guard in the military grade listed in this announcement.
• Males born after 31 December 1959 must be registered for Selective Service.
• Federal employment suitability as determined by a background investigation.
• May be required to successfully complete a probationary period.
• Participation in direct deposit is mandatory.
• Must have or be eligible to obtain the following MOS's: 91, 92A, 92F, 92Y, 92Z, 94
• Must meet the definition of specialized experience by the closing date of the announcement.
• Must be able to pass an operator’s test for forklift equipment up to 10,000 lbs. For positions requiring the operation of motor vehicles, candidates must have a valid state driver’s license.
• Must have 18 months of specialized experience
• Must be able to pass an operator's test for forklift equipment up to 10,000 lbs. For positions requiring the operation of motor vehicles, candidates must have a valid state driver's license.

Qualifications

Military Grades: E-3/PFC - E-9/SGM Compatible Military Assignments: 91, 92A, 92F, 92Y, 92Z, 94 SPECIALIZED EXPERIENCE: Must have 18 months of Experience or training in verifying stock by opening, counting and visually checking the contents of the containers. Experience in establishing stock location by considering such factors as use, size, shape and weight of items. Experience in completing stock records by showing the names, quantities and location of stock. Experience in identifying correct nomenclature and stock number of items in order to locate stock for issue. Experience in performing maintenance such as replacing wooden handles on handsaws, changing blades on power saws, and greasing or oiling power and hand tools. Military Requirements: Military skill set is determined by AFSC/MOS requirements. Upon selection, individuals must be assigned to a compatible military AFSC/MOS in accordance with statutes and National Guard Bureau regulations and must obtain/maintain all requirements of the AFSC/MOS. Specific requirements are found in: references listed below, NGB Compatibility tables and your local Personnel section. Quality of Experience: Length of time is not of itself qualifying. Candidates' experience should be evaluated on the basis of duties performed rather than strictly on the rank of the individual; however, established compatibility criteria/assignments must be followed. The applicant's record of experience and/or training must show possession of the knowledge, skills and abilities needed to fully perform the duties of the position. Must be able to pass an operator's test for forklift equipment up to 10,000 lbs. For positions requiring the operation of motor vehicles, candidates must have a valid state driver's license.

Education

You must provide transcripts or other documentation to support your Educational claims. To receive credit for Education, you must provide documentation of proof that you meet the Education requirements for this position.

Contacts

• Address DE Field Maintenance Shop 3 1197 River Road New Castle, DE 19720 US
• Name: Saidi Abdallah
• Phone: 302-326-7807
• Email: [email protected]