This National Guard position is for a PAINTER (TITLE 32), Position Description Number D2127000 and is part of the FL SMO, National Guard.

Duties

As a PAINTER (TITLE 32), WG-4102-9, you will prepare surfaces (i.e., metal, wood and glass) by removing rust, paint, and loose particles. Fills in holes and dents using body fillers and hardeners. Sands and evens out dents and scars to assure a smooth and level surface using sanders, scrapers, sandpaper, hand tools, wire brushes, and paint remover. Applies coatings to specified areas ensuring the surfaces are free from skips, runs, and drips. Applies rustproof compound to areas such as splash panels, quarter panels, seams structural members, and underbody construction. Applies coatings using brushes, rollers, and spray paint equipment. PHYSICAL EFFORT: Work is performed from ladders, scaffolds, and platforms and in cramped and hard-to­ reach places. Work requires standing, stooping, bending, kneeling, climbing, and working in tiring and uncomfortable positions. There is frequent lifting, carrying, and setting up of materials and equipment that weigh up 10 pounds. Occasionally, materials and equipment may weigh 40 pounds and over. WORKING CONDITIONS: Work is performed inside and outside, where dirt, spray, and fumes are usually present. May be required to prepare and coat surfaces outside in bad weather. Required to wear protective equipment and clothing that are sometimes heavy and uncomfortable. Frequently exposed to the possibility of cuts and bruises and occasionally exposed to the possibility of broken bones.

Requirements

• APPLICANTS SHOULD CONTACT THEIR STATE INCENTIVES MANAGER TO DETERMINE IF ACCEPTING THIS POSITION WILL AFFECT ANY BONUS RECEIVED FROM THE MILITARY.
• This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard, required prior to the effective date of placement.
• Selectee will be required to wear the military uniform.
• Security Clearance requirements are determined by the position
• Participation in direct deposit is mandatory.
• May be required to successfully complete a probationary period.
• Males born after 31 December 1959 must be registered for Selective Service.

Qualifications

AREA OF CONSIDERATION: This position is in the Excepted Federal Civil Service "under the authority of 32 U.S.C. 709", and is open to Category 1: All permanent/indefinite (T32 and T5) technicians employed by the agency Category 3: All current military members of the Florida National Guard; and Category 4: All individuals who qualify for membership in the Florida National Guard and are willing to become T32 Dual Status technicians. First consideration will be given to Category 1. FLARNG BUS Code NG5022: This position is "included" in the bargaining unit and eligible for labor organization representation. The current exclusive representative is The Association of Civilian Technicians, Chapter 87 and the President is Mr. Michael Ortmayer at [email protected] or (904) 573-2300 ext 1023. PCS: Permanent Change of Station (PCS) costs, Recruitment or Relocation Incentive MAY be authorized. Authorization for payment of PCS expenses, Recruitment or Relocation Incentive will be granted ONLY after determination is made that payment is in the best interest of the Florida National Guard. MILITARY GRADE: Enlisted: E8 & below GENERAL EXPERIENCE: Must have experience or training which demonstrates the knowledge of surface preparation (removal of rust, dirt, paint, etc); coating methods (brushing, rolling, and spraying); and coating materials (paints, varnishes, shellacs, etc.); the ability to use tools and equipment associated with the painting trade and to read and interpret directions. SPECIALIZED EXPERIENCE: WG-09 Must have at least 1-year equivalent to at least next lower grade level;experience or training which demonstrates the knowledge in surface preparation and coating methods and techniques; building up, shaping, and leveling surfaces with metal and synthetic resins, plastics, and patching compounds; obtaining finely smoothed surfaces with abrasive compounds, pumice, and rottenstone; even out dents and scars by burning-in processes; and treat surfaces with pre-coating agents.

Education

If you are using Education to qualify for this position:

You must provide transcripts or other documentation to support your Educational claims. To receive credit for Education, you must provide documentation of proof that you meet the Education requirements for this position.

Contacts

• Address FL SMO 5629 SR 16 W Starke, FL 32091 US
• Name: FLNG-Staffing-Distro Cert-Staffing-Distro
• Email: [email protected]