This is a Direct Hire Authority (DHA) solicitation utilizing the DHA for Certain Personnel of the DoD Workforce to recruit and appoint qualified candidates to positions in the competitive service. About the Position: You will function as a Civil Engineer (Structural) with the Army Corps of Engineers, Nashville District, Engineering and Construction Division.

Duties

Perform a wide variety of structural engineering features pertinent to the new construction and/or modification of navigation locks and dams, flood control and local protection projects and appurtenant features. Apply loads to structural members and performs stability and flotation analysis to obtain resultant stresses such as shear, tension, compression or torsion on the structure. Prepare sketches showing dimensions, steel sizes and spacing, and notes required to prepare contract drawings pertaining to structural design. Prepare or coordinate preparation of finished Computer Aided Drafting and Design (CADD) drawings on structural items for use in contract drawings. Make comparative cost estimates as an aid in choosing between two or more alternative designs. Coordinate the engineering data resulting from preceding work and provides technical assistance in the preparation of preliminary designs and estimates. Review incoming correspondence, regulations, and directives to keep abreast of new policies and procedures.

Requirements

• Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
• May be selected at any grade level with non-competitive promotion potential to target grade. Non-competitive promotion potential to the target grade based on time-in-grade requirements and demonstrated ability to perform the higher graded duties.

Qualifications

Who May Apply: US Citizens In order to qualify, you must meet the education or education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. All grades must meet the basic education requirement listed under Education. In addition to this basic education requirement, for the GS-7, GS-9, and GS-11 levels you must also meet the following Specialized Experience for the GS-07: One year of specialized experience which includes performing engineering work such as: searching technical reports to obtain information relating to projects; and applying basic formulas to routine calculations. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-05) OR Education: Successfully completed or will complete within (3) months one full academic year of graduate level education in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as Civil Engineering (Structural). (Note: You must attach a copy of your transcripts.) OR Superior Academic Achievement. In order to be creditable under this provision, Superior Academic Achievement must have been gained in a curriculum that is qualifying for the position to be filled, such as that identified in education above. Superior Academic Achievement is based on: (1) Class Standing - Applicants must be in the upper third of the graduating class in the college, university, or major subdivision, such as the College of Liberal Arts or the School of Business Administration, based on completed courses; OR (2) Grade-Point Average (G.P.A.) - Applicants must have a grade-point average of either (a) 3.0 or higher out of a possible 4.0 ("B" or better) as recorded on your official transcript, or as computed based on 4 years of education, or as computed based on courses completed during the final 2 years of the curriculum; or (b) 3.5 or higher out of a possible 4.0 ("B+" or better) based on the average of the required courses completed in the major field or the required courses in the major field completed during the final 2 years of the curriculum.; OR (3) Honor Society Membership - Applicants may be considered eligible based on membership in one of the approved national scholastic honor societies listed by the Association of College Honor Societies (https://www.achsnatl.org/).ORCombination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) by 18. Add the two percentages. Specialized Experience for the GS-09: One year of specialized experience which includes preparing portions of conventional engineering plans, designs, and/or design specifications; and conducting limited site surveys. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-07). OR Education: Master's or equivalent graduate degree or 2 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as electrical engineering. OR Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the first year (total graduate semester hours minus 18) by 18. Add the two percentages. Specialized Experience for the GS-11: One year of specialized experience which include providing developing structural designs; preparing design engineering documents such as drawings, calculations and narratives; performing site evaluations and investigations; utilizing Computer Aided Drafting and Design (CADD) drawings on structural items for use in contract drawings; developing design computations for structural development features. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-09). OR Education: Ph.D. or equivalent doctoral degree or 3 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as structural engineering. OR Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the second year (total graduate semester hours minus 36) by 18. Add the two percentages.

Education

Basic Requirement for all Civil Engineer (Structural) positions and for basic qualifications at the GS-7, GS-9 and GS-11 level:
Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must:(1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET);
OR
(2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
A combination of Education and Experience: College-level education, training, and/or technical experience that furnished(1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and(2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.
3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.
4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: http://www.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html

Contacts

• Address GJ-APF-W2SM03 US ARMY ENGINEER DISTRICT, NASHVILLE DO NOT MAIL Louisville, KY 40201 US
• Name: Army Applicant Help Desk