THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION. This National Guard position is for a ELECTRONICS TECHNICIAN (RADAR), Position Description Number D1684P01 and is part of the ID 266 RANS, National Guard. This position is permanent.

Duties

(1) Deploys, installs, integrates, operates, optimizes, recovers, maintains, and repairs radar systems, sub-systems and components. Ensures that complex air control radar systems are operating at specified technical order (TO) standards and mission requirements. Independently validates operational readiness of complex radar systems for accurate height, range, and azimuth. Validation determines if corrective actions are needed to return the equipment to established tolerances. (2) Integrates and maintains various subsystems such as transmitters, receivers, Digital Target Extractors (DTE), Theatre Missile Defense processors (TMD), Identification Friend or Foe (IFF), Situation Display Console (SDC), Electronic Counter Measures (ECM) and Electronic Counter Counter Measures (ECCM). Radar systems, sub-systems, and components range from older analog microwave technology up to computerized digital technology. (3) Utilizes an extensive variety of Test, Measuring, and Diagnostic Equipment (TMDE) to analyze, evaluate, test, calibrate, modify, diagnose, and perform corrective repair to assure the integrity of assigned equipment. Interprets highly complex electronics diagrams and schematics for determining the cause and leading to the repair of equipment malfunctions. (4) Performs site surveys and uses sophisticated engineering analysis tools (e.g. Falcon Look, and Radar Coverage Predictor) to generate placement and configuration documentation depicting radar coverage and radiation patterns. Notifies appropriate agencies of possible Radio Frequency (RF) radiation, interference or other hazards. Develops, formats, and reviews both internal and external after-action report documentation. Provides direct customer support which includes field testing and recommending new equipment, site surveys, training, resolving problems related to configuration management, systems functionality, hardware and software configuration, and system conflict resolution. (5) Coordinates frequency requests with installation spectrum manager or other agencies to de-conflict frequency assignments when required. (6) Performs equipment modification and changes as directed by Time Compliance Technical Orders (TCTO). Works with Quality Assurance, Job Control, and Supply to insure the appropriate TCTO kit is on hand, schedule and perform the modification, and complete a special inspection at the completion of the modification. Designs, requests approval for, and performs temporary modifications to solve unique one-of-a-kind technical issues with the equipment and configurations. Supports and assists depot and other mobile maintenance teams on extensive equipment modifications. May be tasked to travel with and provide expertise to major command sponsored site support teams. (7) Tracks and accounts for equipment status and location and coordinates equipment status changes through Maintenance Operations Control. Performs system trend analysis. Performs Maintenance Data Collection (MDC) and participates in Maintenance Standardization Evaluation Program (MSEP) processes. (8) Develops, establishes, and maintains work center training programs. Plans and schedules tasks and training activities for drill status guard members. Oversees and conducts on-the-job training (OJT) for personnel. Creates and develops lesson plans. Ensures availability of facilities and training aids. Monitors the training status of personnel and ensures that supplemental and/or remedial training is accomplished. (9) Ensures mobilization readiness of section personnel and equipment. Fabricates cables and connectors to interface with various commercial and military electronic systems and sub-systems. Completes proper documentation and follows procedures for incident reporting. Completes maintenance data collection and performs administrative duties for TO and work center files. Manages bench stock, logistics products, historical records, training records, Test, Measurement, and Diagnostic Equipment (TMDE) records, hazardous waste, and safety procedures. (10) Acts as Communications Security (COMSEC) responsible officer for work center. (11) Performs other duties as assigned.

Requirements

• NATIONAL GUARD MEMBERSHIP IS REQUIRED. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position.
• This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard, required prior to the effective date of placement.
• Selectee will be required to wear the military uniform.
• Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment.
• Applicants who are not currently a member of the National Guard must be eligible for immediate membership and employment in the National Guard in the military grade listed in this announcement.
• Males born after 31 December 1959 must be registered for Selective Service.
• Federal employment suitability as determined by a background investigation.
• May be required to successfully complete a probationary period.
• Participation in direct deposit is mandatory.
• Must be able to obtain/maintain Secret Security Clearance.
• Must be able to obtain/maintain Electronics Technician AFSC as member of 266 RANS.

Qualifications

Military Grades: E-1 to E-6 THE FOLLOWING QUALIFICATIONS MUST BE REPRESENTED BY THE CONTENTS OF YOUR RESUME. To ensure full credit is given for the qualification requirements listed below we suggest using the USA Jobs resume builder. IF YOU USE YOUR OWN RESUME PLEASE ENSURE THAT YOU INCLUDE THE BEGINNING AND ENDING DATES (MONTH AND YEAR) FOR ALL JOBS LISTED IN YOUR RESUME. Verbiage displayed on your resume or application must contain your own words. You may refer to position descriptions, i.e. the general and specialized experience located within the vacancy announcement, to assist with describing work experiences; however, resumes or applications received in verbatim will not be considered. In your resume you will need to address the general and specialized experience listed below. Please use as much detail as needed, giving dates (months and years) of the experience, position title and how the experience was gained. This information is needed to determine if you are qualified for the position. GENERAL EXPERIENCE: Work involves performing maintenance, troubleshooting, testing, operating, or development work on all kinds of electrical equipment. Experience, education or training performing simple mechanical installations and adjustments. Experience which demonstrates the applicant's ability to recognize obvious malfunctions. Experience using common hand tools. Experience that demonstrates the ability to follow written instructions. SPECIALIZED EXPERIENCE: GS-09 - Must have at least 24 months experience, education or training in installing, testing, and supporting complex electronics equipment, solving technical problems, leading small project teams and reviewing instructions for the repair, modification and maintenance equipment and related test-set equipment. GS-11 - Must have at least 36 months experience, education or training in utilizing principles, basic functions and application of theory of electronic systems or equipment. Experience in diagnosing problems and determining needed repairs for malfunctions in electronic equipment or systems. Experience in making mechanical repairs that required the use of precision measuring and calibrating equipment. Experience in using complex test equipment such as deviation meters, complex special test panels, etc. Experience which demonstrates the ability to interpret technical manuals, specifications, and publications.

Education

There are no additional education requirements required for this position.

Contacts

• Address ID 266 RANS 266 Range Squadron Mountain Home AFB, ID 83647 US
• Name: Benjamin O'Neal
• Email: [email protected]