About the Position: Serve as Chief, Survey Unit and provides hydrographic, topographic, planimetric, and geodetic survey capabilities to support the Chief, Waterways Management Section.

Duties

Arrange meetings, representing the District, with state, city and county officials to work out details of local cooperation and other phases of navigation related activities. As Survey Unit Chief, directs a subordinate staff of approximately 12 to 14 members located in three remote field offices, involved in hydrographic and topographic surveying processing data and preparing charts in various formats. Maintain weekly and long range work plans and schedules to support contract surveys, dredged material placement surveys, and beach condition and erosion surveys. Provide technical assistance to Navigation Managers and Project Management in the development of an annual plan of work, schedules deadlines for accomplishing the navigation program.

Requirements

• Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
• Temporary Duty Travel (TDY) up to 20% may be required.
• This position requires the incumbent to possess and maintain a valid State issued Driver's License.
• This position requires the incumbent to obtain and maintain a valid USACE small vessel operator’s license within one year of entry.
• This position requires a pre-employment and periodic physical examination and/or evaluation under the District Medical Surveillance Program, and requires the use of personal protective clothing or equipment.

Qualifications

Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities. 30 Percent or More Disabled VeteransCurrent Department of Army Civilian EmployeesCurrent Department of Defense (DOD) Civilian Employee (non-Army)Defense Civilian Intelligence Personnel System (DCIPS) Interchange AgreementDomestic Defense Industrial Base/Major Range and Test Facilities Base Civilian Personnel WorkforceExecutive Order (E.O.) 12721Interagency Career Transition Assistance PlanLand Management Workforce Flexibility ActMilitary Spouses, under Executive Order (E.O.) 13473Non-Appropriated Fund Instrumentality (NAFI)Non-Department of Defense (DoD) TransferOffice of Personnel Management (OPM) Interchange Agreement EligiblePeople with Disabilities, Schedule APostal Service/Peace Corps and Other Unique AuthoritiesPriority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician EligiblePriority Placement Program, DoD Military Spouse Preference (MSP) EligiblePriority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability RetirementPriority Placement Program, DoD Retained Grade Preference EligibleRe-employed AnnuitantReinstatementScience, Mathematics, and Research for Transformation (SMART)Veterans Employment Opportunity Act (VEOA) of 1998 In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. BASIC REQUIREMENTS: GS-0801 General Engineer & GS-0810 Civil Engineer- A I have a bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. B I have a combination of education and experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. I am currently registered as an Engineer Intern (EI), Engineer in Training (EIT), or licensed as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. (Note: You must attach a copy of your transcripts, AND proof of registration as an Engineer Intern (EI) or Engineer in Training (EIT) or copy of your Professional Engineer (PE) license.) C I have a combination of education and experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. I have successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. (Note: You must attach a copy of your transcripts, AND proof of passing the Fundamentals of Engineering (FE) examination or other written test required for professional registration. D I have a combination of education and experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. I have successfully completed at least 60 semester hours or 90 quarter hours of courses in the physical, mathematical, and engineering sciences that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. E I have a combination of education and experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. I have successfully completed a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, and have at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. View "Education" Section below for more education qualifications. SPECIALIZED EXPERIENCE: I have one year of specialized experience equivalent to the GS-11 grade level in the Federal service which includes providing expertise in state-of the-art surveying instrumentation and methodology to assure that all project requirements are met by utilizing the most effective surveying technology. You will be evaluated on the basis of your level of competency in the following areas: Environmental Compliance and Preventive ActionHydraulic EngineeringLeadershipPartnering Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-12).

Education

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: http://www.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html


GS 1301 Physical Scientist-

I have a bachelor's degree (or higher degree) in physical science, engineering, or mathematics which included 24 semester hours in physical science and/or related engineering science such as mechanics, dynamics, properties of materials, and electronics.

I have a combination of education and experience which includes courses equivalent to one of the majors, as shown in A above, that included at least 24 semester hours in physical science and/or related engineering science, plus appropriate experience or additional education.

GS 1370 Cartographer-

I have a bachelor's degree (or higher degree) in cartography, or a degree with a major that included or was supplemented by at least 30 semester hours in cartography and/or directly related science, and related mathematics. Such course work includes, but is not limited to, cartography, astronomy, geodesy, photogrammetry, physical and geological oceanography, computer science, land surveying, geophysics, physical geography, and remote sensing. The 30 semester hours must have included at least 6, but no more than 15, semester hours of college level, non-business mathematics or statistics (i.e., college level algebra, trigonometry, calculus, or scientific mathematics or statistics requiring equivalent college-level courses as prerequisites).

I have a combination of education and experience which includes courses equivalent to a major in cartography, or a major that included or was supplemented by at least 30 semester hours in cartography, and/or directly related science, and related mathematics, as shown in A above, plus appropriate experience or additional education.

GS 1372 Geodesist-

I have a bachelor's degree (or higher degree) in geodesy, or a degree that included 30 semester hours in any combination of geodesy, mathematics, physics, astronomy, engineering science, surveying, geodetic surveying, photogrammetry, or geophysics. The course work must have included differential and integral calculus.

GS 1373 Land Surveyor-

I have a bachelor's degree (or higher degree) in land surveying; or civil engineering with a surveying option/emphasis. My civil engineering major included at least 6 semester hours of surveying, 3 semester hours of land law, and 21 additional semester hours in any combination of the following: surveying, photogrammetry, geodetic surveying, geodesy, route surveying, remote sensing, cartography, survey astronomy, land information systems, computer-aided mapping, aerial photo interpretation, and survey analysis and adjustments.

I have a current registration as a land surveyor in a State, territory, or the District of Columbia obtained by written examination under conditions outlined in the National Council of Engineering Examiners (NCEE) Unified Model Law for Registration of Surveyors. (Note: You must attach a copy of your registration obtained based on successful completion of the written examinations.)

Contacts

• Address RL-W2SR06 US ARMY ENGINEER DISTRICT-WILMINGTON DO NOT MAIL Wilmington, NC 28402 US
• Name: Army Applicant Help Desk