The Utility Systems Repairer-Operator, is assigned shift responsibility as utility systems operator in charge on a regular and recurring basis. They operates steam boilers, hot water boilers, and the chiller plant. The boilers are multifuel (natural gas or fuel oil) mechanically fired, power boilers generating steam at 65 pounds per square inch and associated equipment. The chiller plant consists of two 400 ton water cooled chillers and two 140ton air cooled chillers and associated equipment.

Duties

Duties for the position include but are not limited to: Operates steam boilers, hot water boilers, and the chiller plant. The boilers are multifuel (natural gas or fuel oil) mechanically fired, power boilers generating steam at 65 pounds per square inch and associated equipment. The chiller plant consists of two 400 ton water cooled chillers and two 140 ton air cooled chillers and associated equipment. Capable of operating generators and providing manual transfer if required. Works without the presence or availability of a supervisor on second shift, third shift and weekend shifts. Continually keep staff informed of events that may affect hospital operations. When assigned to the main plant, operates a computer driven building management system which controls the integral heating and cooling systems. Responsible for operating and maintaining the plant and make decisions affecting the total operational output and efficiencies. Performs maintenance/repair and operation of the boiler plant, chiller plant, water softener system, and domestic water tank pumping system. Inspect adjust and maintain the air conditioning and boiler plant equipment. Monitor and operate the computer driven building (HVAC)management system, making adjustments as necessary. Monitors and resets fire alarm systems, critical temperature alarms, and medical air alarms. Inspect, maintain, and repair all components of the heating plant and all auxiliary equipment associated with the cooling plant to include repair and replacement of mechanical pumps, seals, bearings, packing glands, impellers, shafts, valves, wye strainers, and pressure reducing stations. Makes repairs and modifications as required to piping/plumbing for heating/cooling systems, chemical feed systems and fuel systems. Repairs, replaces, and makes modifications as required to electrical and pneumatic control systems. Installs and connects transformers, motors, relays, etc. Troubleshoots variable speed drive motor controls, purge type combustion controls and flame safeguard controls. Removes and replaces defective programmer controls for boilers. Perform preventive maintenance on equipment identified on the PM1 schedules which consist of items such medical and HVAC air compressors, vacuum pumps, air handlers, pumps, heating and refrigeration equipment. Boiler water and cooling tower water loops will be tested and treated. Hourly, daily, and monthly boiler logs will be maintained for use in maximizing efficiency. Operator will also be responsible for calling contractors for needed repairs of equipment covered under service contracts after normal duty hours. Operation of equipment will involve inspection and adjustment in accordance with set guidelines for operation. Operator will be responsible for monitoring and logging pertinent information from gauges, thermometers, graphs, indicators, and flue gas sampling for BPA compliance. Monitor the computer driven building management controls system to diagnose and trouble shoot operational problems in respect to temperature, humidity, air changes, and make adjustments and corrections of operational deficiencies. Is responsible for utility shut down in case of emergency for water, gas, fuel oil, electrical power, etc. as set forth in emergency utility shut down procedure log. Other duties as assigned Work Schedule: Full Time. Rotating Shifts. Position Description Title/PD#: Utility Systems Repairer/Operator/PD9692A Physical Requirements: Works in confined areas, requires walking, standing, climbing, bending, crouching, stooping and kneeling for prolonged periods of time. Works is tiring and uncomfortable positions. Lifts and carries repair parts, tools, and equipment weighing up to pounds . 0ccasionally handles heavier material.

Requirements

• You must be a U.S. citizen to apply for this job
• Subject to a background/suitability investigation
• May serve a probationary period
• Selective Service Registration is required for males born after 12/31/1959
• A complete application package; Resume, Transcripts, etc.
• Selected applicants will be required to complete an online onboarding process

Qualifications

To qualify for this position, applicants must meet all requirements by the closing date of this announcement. EXPERIENCE: A specific length of training and experience is not required, but you must show evidence of training or experience of sufficient scope and quality of your ability to do the work of this position. Evidence which demonstrates you possess the knowledge, skills, and ability to perform the duties of this position must be supported by detailed descriptions of such on your resume. Applicants will be rated in accordance with the OPM Federal Wage System Qualification Standards. The Utility Systems Repairer-Operator. WG-4742-10, must posses knowledge of all operational phases of boiler plant operations (e.g., water treatment, fuel systems, steam generation, and pollution control) and their interrelationships for efficient and economical generation of steam. They must posses knowledge of all operational phases of chiller plant operations for water cooled centrifugal and air cooled chillers to meet load demands in the most efficient manner. They will need to possess knowledge and skill to make major repairs to high pressure boilers that maintain prescribed boiler temperatures and pressures and make major repairs to all associated components of high pressure steam boiler and chiller plants. SCREEN-OUT ELEMENT: Your qualifications will first be evaluated against the prescribed screen out element, which usually appears as question 1 in the on-line questionnaire. Those applicants who appear to possess at least the minimal acceptable qualification requirement are considered for further rating; those who do not are rated ineligible and are eliminated. The potential eligibles are then rated against the remainder of the Job Elements: Equipment Assembly, Installation, RepairInterpret Instructions, Specifications (includes blueprint reading)Measuring InstrumentsTechnical PracticesUse and Maintain Tools and EquipmentWithout more than normal supervision Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religions; spiritual; community; student; social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience. Note: A full year of work is considered to be 35-40 hours of work per week. Part-time experience will be credited on the basis of time actually spent in appropriate activities. Applicants wishing to receive credit for such experience must indicate clearly the nature of their duties and responsibilities in each position and the number of hours a week spent in such employment.

Education

This job does not have an education qualification requirement.

Contacts

• Address VA Northern California Health Care System 10535 Hospital Way Mather, CA 95655 US
• Name: Sydnee Holmes
• Phone: 504-635-8084
• Email: [email protected]