THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION. This National Guard position is for a COMPOSITE FABRICATOR (T32), Position Description Number D2503000 and is part of the AL 187TH Fighter Wing, National Guard. ORGANIZATION: 187TH FW, MONTGOMERY, AL SELECTING OFFICIAL: SMSGT ROBERT PAULENE

Duties

1. Improves, modifies, fabricates, and designs repairs for low observable assemblies, sub-assemblies, and components ensuring proper weight to strength ratios are met and maintains structural and low observable integrity requirements including associated aircraft structural composites. Removes, inspects, designs, and implements emergency repairs using various novel techniques or methods. Documents maintenance actions in applicable automated system and/or records. Advises and provides documents to associated engineers, overhauls, reinstalls, or adjusts irregular surfaces, control system components, assemblies/sub-assemblies, and specialized coatings. Identifies and discusses potential problems in new designs or maintenance methods and procedures with engineers and other originators, advises on improvements in repair and maintenance methods including application techniques. May attend meetings or working groups with engineers, contractors etc. to resolve problems and maintain awareness of current techniques and processes that may not be documented. Orders and turns in aircraft parts and assemblies. May serve as the primary worker responsible for monitoring the completion of assigned maintenance tasks. (45%) 2. Performs a variety of extensive evaluations of weapons systems using a variety of complex tools and assessment equipment to assess that the proper radar cross section (RCS) signature according to the associated technical order data, mission requirements and other policy regulations, instructions, and guidance. Inspections will be done on weapons system structure, LO coating, and LO materials. Evaluates operational deficiencies and records LO system damage types, specific multi-complex dimensions, and location plots using the automated maintenance systems related to the specific weapons system. Records RCS results and updates aircraft signature status following aircraft flights, at scheduled intervals, and/or after LO coating/structural maintenance and repair actions. Conducts audits of LO aircraft and associated signature management databases, ensuring that RCS signature reported accurately reflects aircraft physical status. Certifies integrity of signature management databases through verification, addition, and removal of audit data. Audits of weapons systems will be conducted utilizing applicable portable automated electronic devices to mark and record signature assessment damages. Reports audit discrepancies and ensures LO aircraft systems and signature management databases are maintained to established MAJCOM tolerances and standards. Interprets, designs, and implements multi-complex LO systems maintenance work packages for accurate reduction of RCS signature. Assists in set-up of Repair Verification Radar (RVR) for near field imaging of LO panels and structures for identifying suspected damage and/or for process verification. (20%) 3. Performs repair, application, and maintenance of corrosion preventatives and paints on aircraft, powered, and non-powered AGE (aerospace ground equipment). Identifies metal corrosion. Performs necessary testing to identify type of corrosion present by examination with magnifying equipment, chemical and mechanical methods. Treats aircraft engines in accordance with applicable technical publications. Identifies, blends, stores, controls, and disposes of hazardous materials such as acids, caustics, alcohols, solvents, cleaners, primers and surface coatings used for corrosion removal, treatment and protection in accordance with applicable directives. Removes corrosion by mechanical and chemical procedures to include use of portable powered (electric and pneumatic) sanders, buffers, brushes, bead blasters, vacuum cleaners, scrapers, grinders, acids, caustics, solvents, alcohols and other agents used in corrosion control processes. Treats metal with chemical procedures, such as pretreatments, to protect metal from oxidation. Performs functions such as pickling of metals to prepare for good bonding with primer coat of protective materials. Applies protective coatings, markings, and decals. Use conventional paint spray equipment, electrostatic spray equipment, brushes and special applicators when applying primers and surface coatings. Operates wash rack as required. Accomplishes corrosion and washing inspections within schedule provided to ensure compliance with monthly and weekly maintenance plan. Assesses corrosion problems and select appropriate treatment to correct problems and minimize future repair work for same or related problem area. Conducts training on proper methods and procedures of composite wash rack operations. (20%) 4. Performs other duties as assigned. FOR FULL POSITION DESCRIPTION PLEASE CONTACT HRO

Requirements

• NATIONAL GUARD MEMBERSHIP IS REQUIRED. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position.
• This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard, required prior to the effective date of placement.
• Selectee will be required to wear the military uniform.
• Applicants who are not currently a member of the National Guard must be eligible for immediate membership and employment in the National Guard in the military grade listed in this announcement.
• May be required to successfully complete a probationary period.
• Participation in direct deposit is mandatory.

Qualifications

MILITARY REQUIREMENTS: This is an excepted service position that requires membership in a compatible military grade in the Alabama Air National Guard. Applicants who are not currently a member of the Alabama Air National Guard must be eligible for immediate membership. If you are not sure you are eligible for military membership, please contact an Alabama Air National Guard recruiter at (800) 864-6264 prior to applying for this position. MINIMUM MILITARY RANK: A1C MAXIMUM MILITARY RANK: TSGT *Other Requirements: For positions requiring the operation of motor vehicles, candidates must have a valid state driver's license. EXPERIENCE REQUIREMENTS: Each applicant must fully substantiate (in his/her own words) that he/she meets the requirements of the Specialized Experience listed below: Otherwise, the applicant will be considered unqualified for this position. DO NOT COPY THE VACANCY ANNOUNCEMENT OR THE POSITION DESCRIPTION. DOING SO MAY RESULT IN DISQUALIFICATION FOR THE POSITION. GENERAL EXPERIENCE: Experience or training demonstrating very basic working knowledge of the properties and characteristics of a number of composite and plastic bonding agents, such as fiberglass, Kevlar, PVC, graphite, film adhesive, silicones, epoxies, etc. and Low Observable (LO) material characteristics; a very basic working knowledge of sheet metal theory, methods and practices; knowledge of very basic shop mathematics to calculate proportions and amount of materials required in repairing or modifying components; knowledge of and skill in the use of basic hand and powered tools common to the bonding operations as well as those utilized in the sheet metal trade; knowledge of health hazards associated with maintenance as well as proper mitigation procedures i.e. PPE, decontamination, and housekeeping; and ability to learn new skills and apply them to work in this series. SPECIALIZED EXPERIENCE: You must have at least 18 months experience in each of the following tasks:Experience or training demonstrating a practical thorough knowledge of the newest substances to recommend and/or select materials for prototype and one-time items. Composite Fabricators have an extensive knowledge of the properties and machining characteristics of a variety of composite or plastic materials. Extensive practical knowledge of the LO theory and practices with a direct influence to RCS reduction. Knowledge in adapting shop practices, methods, and procedures for use in unorthodox processes to fit new projects. Knowledge in establishing manufacturing procedures for newly developed compound materials by experimenting with various manufacturing techniques, curing times, irregular curvatures (surfaces), temperatures, and pressure. Knowledge in manufacturing master patterns and molds with numerous compound curves and intersecting compound angles. Knowledge in applying mathematics to calculate loads, fits, sizes, and weights not provided in instructions and blueprints to overcome design flaws and lay out more complex items. Broad knowledge in interactions between like and dislike chemical and other low observable materials to provide a coherent bond line action.

Education

SUBSTITUTION OF EDUCATION IS NOT CONSIDERED FOR WAGE GRADE POSITIONS.

Contacts

• Address AL 187TH Fighter Wing 5187 Selma Hwy Montgomery, AL 36108 US
• Name: Robert Paulene
• Phone: 334-394-7332
• Email: [email protected]