This is a public notice flyer to notify interested applicants of anticipated vacancies. Applications will not be accepted through this flyer. Interested applicants must follow the directions in the "How to Apply" section of this flyer to be considered. There may or may not be actual vacancies filled from this flyer. Notice of Result letters will not be sent to applicants who respond to this flyer.

Duties

You will advise management personnel in NSWCEN, Basic Training Command, Advanced Training Command, and Assessment Command on all matters pertaining to support facilities, capabilities, and limitations. You will provide coordination and oversight for NSWCEN Environmental Compliance (e.g., HAZMAT) Program. You will conduct on-site field investigations at both CONUS/OCONUS sites for engineering data collection in support of project planning and design for all NSWCEN administrative and training facilities. You will assist in the development of project documents (to include DD-139ls), budgeting, and execution of modernization and construction projects. You will provide support for facilities services and funding recommendations for NSWCEN and provide oversight of facility work both routine and emergency.

Requirements

• Must be a US Citizen.
• Must be determined suitable for federal employment.
• Must participate in the direct deposit pay program.
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
• Males born after 12-31-59 must be registered for Selective Service.
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
• This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). Certification in the Acquisition Functional Area and category assigned to the position is required within established category timeframes.
• You will be required to complete training, obtain, and maintain a government credit card for travel and travel-related purchases.
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.

Qualifications

In addition to the Basic Requirements for this position, your resume must also demonstrate at least one year of specialized experience at or equivalent to the GS-12 grade level or pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: 1) Leading production of facilities engineering design packages, including design drawings, plans, specifications and design-build requests for proposal; 2) Reviewing multiple shore facilities engineering design submittals to provide subject matter expert acceptance recommendations to officials; 3) Providing shore facilities engineering design consultation services to officials during construction. Additional qualification information can be found from the following Office of Personnel Management website: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/general-engineering-series-0801/ https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/architecture-series-0808/ Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: 0808 Series: Degree: architecture; or related field that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following: structural technology, properties of materials and methods of construction, and environmental control systems. OR Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildings. The adequacy of such background must be demonstrated by at least one of the following: Related Curriculum: Degree in architectural engineering may be accepted as satisfying in full the basic requirements, provided the completed course work in architectural engineering provided knowledge, skills, and abilities substantially equivalent to those provided in the courses specified in paragraph A. The curriculum for a degree in either architecture or architectural engineering covers function, esthetics, site, structure, economics, mechanical-electrical, and other engineering problems related to the design and construction of buildings primarily (but not exclusively) intended to house human activities. The courses required for a degree in architecture generally place emphasis upon planning, esthetics, and materials and methods of construction, while the courses for an architectural engineering degree place equal or greater weight on the technical engineering aspects such as structural systems, mechanical systems, and the properties of materials. Because of this difference in emphasis, persons with degrees in architecture may have a preference for work assignments that offer greater opportunities for them to express their artistic and creative abilities. As a result, they may be more concerned with planning and design aspects of architecture, and persons with degrees in architectural engineering may be more engaged in aspects emphasizing technical engineering considerations. Experience: An applicant lacking a degree in architecture must have had l year of experience in an architect's office or in architectural work for each year short of graduation from a program of study in architecture. In the absence of college courses, 5 years of such experience is required. This experience must have demonstrated that the applicant has acquired a thorough knowledge of the fundamental principles and theories of professional architecture.

Education

Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:

0801/0830/0850 Series:

A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR

B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. 3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. 4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)

Contacts

• Address NAVAL SPECIAL WARFARE CTR CORONADO Naval Special Warfare Center Coronado, CA 92155 US
• Name: Donovan Cruz
• Email: [email protected]