This is a public notice flyer to notify interested applicants of anticipated vacancies. Applications will not be accepted through this flyer. Interested applicants must follow the directions in the "How to Apply" section of this flyer to be considered. There may or may not be actual vacancies filled from this flyer. Notice of Result letters will not be sent to applicants who respond to this flyer. A Cost-of-Living-Allowance (COLA) of 12.25% will be added to the stated salary.

Duties

You will prepare project descriptions using the shore planning facility requirements and communication with tenant organizations or in-house staff. You will lead multi-disciplined teams involved with base and asset development. You will make recommendations to decision-makers based on sound economic analysis. You will use basic proficiency in information technology, such as Geospatial Information Systems (GIS), Interoperable Enterprise Facilities Management (ieFACMAN), and eProjects. You will establish basic proficiency in Electronic Project Generator (EPG) and internet Navy Facilities Assets Data Store (iNFADS). You will identify compatible land use and safety issues in performing facility planning (e.g., Hazardous Electromagnetic Radiation to Ordnance [HERO], Air Installations Compatible Use Zone [AICUZ]).

Requirements

• Must be a US Citizen.
• Must be determined suitable for federal employment.
• Must participate in the direct deposit pay program.
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
• Males born after 12-31-59 must be registered for Selective Service.
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
• This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). Certification in the Acquisition Functional Area and category assigned to the position is required within established category timeframes.
• You will be required to complete ethics orientation within three months of appointment and submit a Confidential Financial Disclosure Report, OGE-450, within 30 days of appointment.

Qualifications

GS-12: In addition to the Basic Requirements for this position, your resume must also demonstrate at least one year of specialized experience at or equivalent to the GS-11 grade level or pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: developing or reviewing master plans, Military Construction (MCON) and special project planning for preparing forms, Asset Evaluations, Basic Facility Requirements and economic analysis; preparing statements of works and independent government estimates; performing assigned duties as a Contracting Officer's Representative (COR) (i.e. preparing statements of work, evaluating contractor's technical proposals and submittals, and monitoring contractor performance). Additional qualification information can be found from the following Office of Personnel Management website: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series 0020 Series: Community Planning Series 0020 (opm.gov) 0807 Series: Landscape Architecture Series 0807 (opm.gov) 0808 Series: Architecture Series 0808 (opm.gov) 0810 Series: Civil Engineering Series 0810 (opm.gov) 0896 Series: Industrial Engineering Series 0896 (opm.gov) Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Physical Demands: The position's duties are largely sedentary and consist of office related activities including long periods of sitting, standing, walking and operating telephones, audio-visual and computer equipment. During field visits and facility inspections at assigned activities, you may lift loads less than 20 pounds, climb stairs and ladders, walk, stoop, bend, and stretch to reach objects. You will travel within the area of responsibility approximately 25% of the time. Work Environment: The work place is a typical office equipped with adequate ventilation, air conditioning, heating, lighting and restrooms. You will not normally be exposed hazardous substances or environments in the performance of duties. EDUCATION CONTINUATION: (For 0020, 0807 & 0808 Series please see Education section below.) Professional Engineering Positions, 0810 & 0896: Successful completion of a Degree in Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR Have a combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT) 1 , or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) 2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. 3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. 4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.) 3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. 4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.) Note: Applicants with degrees in related fields, such as those listed above, who do not have the 12 semester hours of specified course work must have had at least 1 year of work experience in community planning acquired under the supervision and guidance of a community planner. Foreign Education: Education completed in foreign colleges or universities may be used to meet the qualification requirements if the applicant can provide documentation indicating that the foreign education is comparable to that received in an accredited educational institution in the United States. It is the responsibility of the applicant to provide such evidence when applying for further information, visit: http://www.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html

Education

Applicants must meet the following Basic Requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: Applicants must possess:
Community Planning Series, 0020: Successful completion of Degree in community planning; or related fieldsuch as urban affairs, architecture, landscape architecture, engineering, sociology, geography, economics, political science, or public administration that included at least 12 semester hours in the planning process, socioeconomic and physical elements of planning, urban and regional economic analysis, and development finance. Note: Applicants with degrees in related fields, such as those listed above, who do not have the 12 semester hours of specified course work must have had at least 1 year of work experience in community planning acquired under the supervision and guidance of a community planner. OR Combination of education and experience: courses equivalent to a major in one of the above disciplines, or a combination of related courses totaling at least 24 semester hours in any combination of the above disciplines of which at least 12 semester hours were in the planning process, and socioeconomic and physical elements of planning, plus appropriate experience or additional education.
Landscape Architecture Series, 0807: Successful completion of Degree in landscape architecture or landscape design. OR Combination of education and experience -- for each year short of graduation, the applicant must have had 1 year of experience under professional leadership and guidance of such character and diversity as to be a satisfactory substitute for the required education. This experience must have included original landscape design. Architecture Series, 0808: Successful completion of Degree in architecture; or related field that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following: structural technology, properties of materials and methods of construction, and environmental control systems. OR Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildings. The adequacy of such background must be demonstrated by at least one of the following:

1. Related Curriculum: Degree in architectural engineering may be accepted as satisfying in full the basic requirements, provided the completed course work in architectural engineering provided knowledge, skills, and abilities substantially equivalent to those provided in the courses specified in paragraph A. The curriculum for a degree in either architecture or architectural engineering covers function, esthetics, site, structure, economics, mechanical-electrical, and other engineering problems related to the design and construction of buildings primarily (but not exclusively) intended to house human activities. The courses required for a degree in architecture generally place emphasis upon planning, esthetics, and materials and methods of construction, while the courses for an architectural engineering degree place equal or greater weight on the technical engineering aspects such as structural systems, mechanical systems, and the properties of materials. Because of this difference in emphasis, persons with degrees in architecture may have a preference for work assignments that offer greater opportunities for them to express their artistic and creative abilities. As a result, they may be more concerned with planning and design aspects of architecture, and persons with degrees in architectural engineering may be more engaged in aspects emphasizing technical engineering considerations.
2. Experience: An applicant lacking a degree in architecture must have had l year of experience in an architect's office or in architectural work for each year short of graduation from a program of study in architecture. In the absence of college courses, 5 years of such experience is required. This experience must have demonstrated that the applicant has acquired a thorough knowledge of the fundamental principles and theories of professional architecture.

For Professional Engineering Positions, 0810 & 0896 Basic Requirements : Please see Qualification section above.

Contacts

• Address NAVAL FACILITIES ENG COMMAND MARIANAS NAVFAC Guam, GU 96630 US
• Name: Judy Flores
• Email: [email protected]