THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION. This National Guard position is for a ELECTRONIC INTEGRATED SYSTEMS MECHANIC, Position Description Number PDD2324000 and is part of the MA ANG 104th FW, National Guard. This is a BARGAINING Unit position. The unit point of contact and contact phone for this position is: MSGT JEREMY CUSHING at [email protected]

Duties

On a day-to-day basis, analyzes performance, tests, inspects, troubleshoots, identifies and isolates malfunctions, disassembles, modifies or repairs and reassembles test stations or ECM Pods and their associated peripherals. Considers the complex interrelated variables arising from a mix of computer hardware and software, stimulus and measurement systems, and special purpose test subsystems. Analyzes malfunctions using schematics, logic and wiring diagrams, programming tables, computer program flow charts, software user guides, computer program listings and factory drawings. Diagnoses circuit operating characteristics using computer query, system peculiar test equipment, and computer diagnostics. Isolates problems to the failing part using self-test diagnostics, oscilloscopes, frequency meters, signal generators, digital, and differential voltmeters, computer registers and printouts and other special and standard tools and test equipment. Removes and replaces components, assemblies, subassemblies, or parts using special and common hand tools, soldering devices and special electronic instruments. 2. May modify and updates avionics Pods, support equipment and support software according to applicable technical publications. Analyzes program data and determines if the criteria is sufficient to provide adequate testing and troubleshooting. Examines recurring malfunctions and software deficiencies to determine testing voids and initiates corrective action by submission of quality deficiency reports, software deficiency reports or proposed modifications. Devises repair procedures based on findings and recommends program changes, procedural changes, or data corrections to correct software deficiencies. Recommends revisions to intermediate maintenance directives. 3. Connects associated testing equipment to interface the test station system to the aircraft system and or Pod to facilitate maintenance/repair of POD or line replaceable units (LRUs) from the avionics systems such as radar, fire control, instrument, flight control, inertial navigation, malfunction analysis and recording equipment systems. Determines whether failures are caused by the unit under test (UUT), the Pod, the test station, or the test program. If the malfunction is found to be in the UUT, Pod or the test station, isolates it to the specific component(s), disassembles and effects repair by replacing solid state devices, micro miniature modules, gyros, sensors, transducers, and any other required parts, and assembles after repair is accomplished and performs operational tests. If the malfunction is in the test program, informs engineers and/or Air Force Logistics Command (AFLC) of the problem and serves as subject matter expert in providing practical technical assistance in resolution. Ensures compatibility of items with each other and with extenders and interfaces. 4. Works with engineers and technicians in the development and/or modification of software, interfaces, extender equipment or additional items of test equipment and in validation of technical data concerning the repair, maintenance, and test of the test station and units under test. Initiates technical data changes. Suggests means by which a component or system can be tested more economically or thoroughly and provides practical technical assistance by explaining peculiarities of the program or assemblies of the test station, UUT, interfaces, extenders, test procedures, etc. 5. Provides hands-on training instructions to lower grade personnel concerned with repair of computer controlled automatic test equipment, manually controlled test equipment, line replaceable units and aircraft integrated systems. Also provides on-the-job instruction to newly assigned personnel, regardless of grade level. Prepares for and participates in various types of readiness evaluations such as Operational Readiness Inspections (ORI), Inspector General (IG) inspections, and Unit Effectiveness Inspections and mobility and command support exercises. May be required to perform such additional duties as structural firefighting, aircraft fire/crash/rescue duty, security guard, snow removal, munitions loading and handling, heavy equipment operator, maintenance of facilities and equipment, or serve as a team member on a board to cope with natural disasters or civil emergencies. Complies with safety, fire, security, and housekeeping regulations. Ensures that material and equipment are properly stored, protected and maintained. Performs other duties as assigned.

Requirements

• NATIONAL GUARD MEMBERSHIP IS REQUIRED. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position.
• This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard, required prior to the effective date of placement.
• Selectee will be required to wear the military uniform.
• Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment.
• Males born after 31 December 1959 must be registered for Selective Service.
• Federal employment suitability as determined by a background investigation.
• May be required to successfully complete a probationary period.
• Participation in direct deposit is mandatory.
• Favorable background check is required.
• Optional Form 306 is a required form and must be signed and dated within the year, or you will be disqualified.
• Reference Worksheet is a required form, and the link on this announcement must be used or you will be disqualified.
• Incumbent must possess or be able to acquire the appropriate level security clearance for this position.

Qualifications

Military Grades: ENL: SRA-TSGT Compatible Military Assignments: AFSC: 2A051,2A031, 2A251, 2A231, 2A252, 2A232, 2A253, 2A233, 2A354, 2A334, 2A355, 2A335, 2A851, 2A831, 2A852, 2A832, 2A951 and 2A931, 2A952, 2A932, 2A953 and 2A933 AREA OF CONSIDERATION: Open to current members of the Massachusetts Air National Guard and those eligible/willing to transfer/enlist. NATIONAL GUARD MEMBERSHIP IS REQUIRED: This is an excepted service position that requires membership in a compatible military assignment in the National Guard. Selectee will be required to wear the military uniform. Acceptance of an excepted service position Constitutes concurrence with these requirements as a condition of employment. Applicants who are not currently a member of the National Guard must be eligible for immediate membership and employment in the National Guard in the military grade listed in this announcement. If you are not sure you are eligible for military membership, please contact a Massachusetts Army National Guard recruiter prior to applying for this position. GENERAL EXPERIENCE: Must have experience, education or training which I have a validated understanding of the basic principles and concepts of the occupational series and grade. SPECIALIZED EXPERIENCE: WG 12: have at least a three-skill level in one of the compatible AFSCs, with 12 months of work experiences, that involved duties such as, inspecting, testing, troubleshooting, repairing and modifying software controlled automated and manually controlled test stations, electronic circuit maintenance pods, peripherals, support equipment and associated subsystems. Knowledgeable of stations that are used to repair and maintain all avionics line-replaceable units and pods. Skilled in analyzing performance, running tests, conducting inspections, troubleshooting, identifying and isolating malfunctions, disassembling, modifying or repairing and reassembling the test stations or electronic circuit maintenance pods and their associated peripherals. Skilled in reading the complex inter-related variables that resulted from a mix of computer hardware and software, stimulus and measurement systems, and special purpose test subsystems. Experiences involved analyzing malfunctions using schematics, logic and wiring diagrams, programming tables, computer program flow charts, software user guides, computer program listings and factory drawings. Skilled in diagnosing circuit operating characteristics using computer query, system peculiar test equipment, and computer diagnostics. Experienced in isolating problems to the failing part using equipment such as, self-test diagnostics, oscilloscopes, frequency meters, signal generators, digital, and differential voltmeters, computer registers and printouts and other special and standard tools and test equipment. Competent in removing and replacing components, assemblies, sub-assemblies, or parts using special and common hand tools, soldering devices and special electronic instruments. Experiences involved modifying and updating avionics pods; or, support equipment and support software according to applicable technical publications. Competent to analyze program data and determined if the criteria are sufficient to provide adequate testing and troubleshooting. WG 13: I have at least 12 months Experiences involved duties such as, inspecting, testing, troubleshooting, repairing and modifying software controlled automated and manually controlled test stations, electronic circuit maintenance pods, peripherals, support equipment and associated subsystems. Knowledgeable of stations that are used to repair and maintain all avionics line-replaceable and pods. Skilled in analyzing performance results, running tests, inspecting, trouble[1]shooting, identifying and isolating malfunctions. Experienced in how to disassemble modify or repair and reassemble test stations or electronic circuit maintenance pods and their associated peripherals. Skills include the ability to consider the complex inter-related variables arising from a mix of computer hardware and software, stimulus and measurement systems, and special purpose test subsystems. Experienced in analyzing malfunctions using schematics, logic and wiring diagrams, programming tables, computer program flow charts, software user guides, computer program listings and factory drawings. Skilled in the diagnoses of circuit operating characteristics using computer query, system peculiar test equipment, and computer diagnostics. Experiences involved isolating problems to the failing part using self-test diagnostics, oscilloscopes, frequency meters, signal generators, digital, and differential voltmeters, computer registers and printouts and other special and standard tools and test equipment. Skilled in removing and replacing components, assemblies, subassemblies, or parts using special and common hand tools, soldering devices and special electronic instruments. Experiences involved modifying and updating avionics pods, support equipment, and support software according to applicable technical publications. Skilled in analyzing program data to determine if the criteria is sufficient to provide adequate testing and troubleshooting. Experienced in the examination of recurring malfunctions and software deficiencies to determine testing voids and initiated corrective action by submission of quality deficiency reports, software deficiency reports or proposed modifications. Skilled in devising repair procedures based on findings and recommending program changes, procedural changes, or data corrections to correct software deficiencies. Experiences included connecting associated testing equipment to interface the test station system to the aircraft system and pod to facilitate maintenance/repair of the pod or line replaceable units from the avionics systems such as, radar, fire control, instrument, flight control, inertial navigation, malfunction analysis and recording equipment systems. Skilled in determining if failures were caused by the unit under test, the pod, the test station, or the test program. Skilled in identifying malfunctions in the unit under test, pod or the test station and isolating it to the specific component(s). Experienced in repairing and replacing solid state devices, micro miniature modules, gyros, sensors, transducers, and any other required parts, and reassembling and performing operational tests. Incumbent will be appointed at the (12) or (13) level depending on qualifications. This position is developmental: Incumbent may be non-competitively promoted to the next higher grade upon completion of an Individual Development Plan (IDP), meeting time in grade requirements, and be recommended for promotion by supervisor. PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of months/years. VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

Education

This job does not have an education qualification requirement.

Contacts

• Address MA ANG 104th FW 175 Falcon Drive Westfield, MA 01085-1482 US
• Name: MA HRO STAFFING INBOX
• Email: [email protected]