About the Position: This is an Engineering Technician (Civil), GS-5/6/7/8/9. This position is located in Appleton, Wisconsin, Operations Division Lake Michigan Project Office, Harbors Maintenance Section.

Duties

Collect and interpret a variety of survey; selects and adapts engineering precedents, principles and practices associated with surveying operations. Collect, compile, verify, and format data essential to maintain proper survey control at the various office harbors and construction projects. Inspect construction work to assure full compliance with the contract requirements. Contact designers to obtain information concerning problems, space limitation, and design component arrangements. Ability to maintain, operate, and perform minor maintenance and repairs on all survey related equipment, such as vessels, motors, trailers, ATVs, snowmobiles, and other mechanized equipment. Perform and test equipment in accordance with established procedures as outlined by manufacturer's literature or the Engineer-in-charge.

Requirements

• Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
• Must possess a valid motor vehicle operator's license.
• A pre-appointment physical exam is required and subject to scheduled medical surveillance.
• Must be capable of obtaining a U.S. Coast Guard or Corps of Engineers license to operate motorboats and within one year of assignment to this position, must be licensed by U.S. Army Corps of Engineers to operate motorboat of 26 feet or less.
• Must possess an American Red Cross Basic First Aid Certificate or complete said course within one year after appointment. Overnight travel required for training, conferences and work assignments may be up to 25% of the time.
• Overnight travel required for training, conferences and work assignments may be up to 25% of the time.

Qualifications

Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities. Current Department of Army Civilian EmployeesCurrent Department of Defense (DOD) Civilian Employee (non-Army)Domestic Defense Industrial Base/Major Range and Test Facilities Base Civilian Personnel WorkforceInteragency Career Transition Assistance PlanLand Management Workforce Flexibility ActMilitary Spouses, under Executive Order (E.O.) 13473Non-Department of Defense (DoD) TransferPriority Placement Program, DoD Military Spouse Preference (MSP) EligibleVeterans Employment Opportunity Act (VEOA) of 1998 In order to qualify, you must meet the education and/or experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. To qualify for the GS-05 grade level, you must have: A. One year of Specialized experiencewhich includes ability ability to interpret surveys; able to locate survey documents; and ability to provide support with survey equipment. (GS-04). OR B. I have successfully completed a full four-year course of study leading to a bachelor's degree (a) with major study in an appropriate field of engineering, construction, or industrial technology; OR (b) that included at least 24 semester hours in any combination of courses such as engineering, engineering or industrial technology, construction, physics, drafting, surveying, physical science, or mathematics with at least 6 of the 24 semester hours in drafting. (Note: You must attach a copy of your transcripts.) OR C. I have the specialized experience as described in A, but less than one year; and I have some education leading to a bachelor's degree but less than required in B. I have computed the percentage of the requirements that I meet, and the total is at least 100% (To compute the percentage, divide your total months of qualifying experience by 12. Then, divide your semester hours of education beyond two years (total semester hours minus 60) by 60. Add the two percentages. The total percentage must equal at least 100 percent to qualify.). (Note: You must attach a copy of your transcripts.) To qualify for the GS-06 grade level, you must have: A. One year of Specialized experience which includes includes ability to interpret surveys; able to locate survey documents; and ability to provide support with survey equipment. OR B. I have successfully completed a half year of graduate level education (9 semester hours) in an appropriate field of study of engineering, construction, engineering or industrial technology, physics, drafting, surveying, physical science or mathematics. (Note: You must attach a copy of your transcripts.) OR C. I have the specialized experience as described in A, but less than one year; and I have a bachelor's degree but less than the half year of graduate level education required in B. I have computed the percentage of the requirements that I meet, and the total is at least 100% (To compute the percentage, divide your total months of qualifying experience by 12. Then, divide your semester hours of education beyond two years (total semester hours minus 60) by 60. Add the two percentages. The total percentage must equal at least 100 percent to qualify.). (Note: You must attach a copy of your transcripts.) To qualify for the GS-07 grade level, you must have: A. One year of Specialized experience which includes technical work organizing assessments and specifications for Hydrographic surveying or dredging systems; collaborate corrections of survey and drawings in accordance with applicable standards; support leads in inspecting work to assure compliance to provides finding feedback as needed; ability to operate various survey vessels and equipment associated with hydrographic and land surveying; and performs minor maintenance of survey vessels and equipment. OR B. I am claiming Superior Academic Achievement, I have a GPA of 3.0 or higher when attaining my bachelor's degree. In order to be creditable under this provision, Superior Academic Achievement must have been gained in a curriculum that is qualifying for the position to be filled, such as that identified in Education above. Superior Academic Achievement is based on: (1) Class Standing - Applicants must be in the upper third of the graduating class in the college, university, or major subdivision, such as the College of Liberal Arts or the School of Business Administration, based on completed courses; OR (2) Grade-Point Average (G.P.A.) - Applicants must have a grade-point average of either (a) 3.0 or higher out of a possible 4.0 ("B" or better) as recorded on your official transcript, or as computed based on 4 years of education, or as computed based on courses completed during the final 2 years of the curriculum; or (b) 3.5 or higher out of a possible 4.0 ("B+" or better) based on the average of the required courses completed in the major field or the required courses in the major field completed during the final 2 years of the curriculum.; OR (3) Honor Society Membership - Applicants may be considered eligible based on membership in one of the approved national scholastic honor societies listed by the Association of College Honor Societies (https://www.achsnatl.org/). (Note: You must submit a copy of your transcripts.) OR C. I have one year of graduate level education (18 semester hours) that is directly related to the work of the position such as engineering, construction, engineering or industrial technology, physics, drafting, surveying, physical science or mathematics. (Note: You must attach a copy of your transcripts.) OR D. I have the specialized experience as described in A, but less than one year; and I have at least a bachelor's degree but less than the required one year of graduate level education as described in B. I have computed the percentage of the requirements that I meet, and the total is at least 100% (To compute the percentage, divide your total months of qualifying experience by 12. Then, divide your semester hours of graduate education beyond the second year (total graduate semester hours minus 36) by 18. Add the two percentages. The total percentage must equal at least 100 percent to qualify.). (Note: You must attach a copy of your transcripts.) To qualify for the GS-08 grade level, you must have: A. One year of Specialized experiencewhich includes understanding designs for a variety of engineering features for piers, breakwaters, roads, pavements, bridges, buildings, floodwalls, drainage structures, water retention structures, pumping stations, revetments and dikes; and utilize CADD systems. B. I have successfully completed one and a half years of graduate level education (27 semester hours) in an appropriate field of study of engineering, construction, engineering or industrial technology, physics, drafting, surveying, physical science or mathematics. OR

Education

C. I have the specialized experience as described in A, but less than one year; and I have at least a bachelor's degree but less than the required one and half years of graduate level education as described in B. I have computed the percentage of the requirements that I meet, and the total is at least 100% (To compute the percentage, divide your total months of qualifying experience by 12. Then, divide your semester hours of graduate education beyond the second year (total graduate semester hours minus 36) by 18. Add the two percentages. The total percentage must equal at least 100 percent to qualify.). (Note: You must attach a copy of your transcripts.)

To qualify for the GS-09 grade level, you must have:

A. I have one year of specialized experience equivalent to the GS-08 level in the Federal service which includes experience in calculating dredging and cut/fill volumes while utilizing engineering techniques to include arithmetic, geometric, algebraic formulas when performing surveying computations; perform Single/Dual and Multi-beam frequency hydrographic surveys; perform appropriate pre-survey calibration and equipment checks; post-process survey data utilizing Computer Aided Design & Drafting (CAD); conduct topographic surveys; implement quality control standards and perform quality assurance on collected survey data; and complete preventative maintenance and repairs on survey equipment.
OR
B. I have successfully completed 2 years of graduate level education or a master's degree in an appropriate field of study of engineering, construction, engineering or industrial technology, physics, drafting, surveying, physical science or mathematics. (Note: You must attach a copy of your transcripts.)
OR
C. I have the specialized experience as described in A, but less than one year; and I have at least a bachelor's degree but less than the required two years of graduate level education as described in B. I have computed the percentage of the requirements that I meet, and the total is at least 100% (To compute the percentage, divide your total months of qualifying experience by 12. Then, divide your semester hours of graduate education beyond the second year (total graduate semester hours minus 36) by 18. Add the two percentages. The total percentage must equal at least 100 percent to qualify.). (Note: You must attach a copy of your transcripts.)

You will be evaluated on the basis of your level of competency in the following areas:

• Ability to Use and Maintain Tools and Equipment
• Administration and Management
• Maintenance Planning and Management
• Teamwork
• Technical Competence

Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent.
GS-05 - Must have 52 weeks at the GS-04 grade level
GS-06 - Must have 52 weeks at the GS-05 grade level
GS-07 - Must have 52 weeks at the GS-06 grade level
GS-08 - Must have 52 weeks at the GS-07 grade level
GS-09 - Must have 52 weeks at the GS-08 grade level

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: http://www.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html

Contacts

• Address RE-W2SM06 US ARMY ENGINEER DISTRICT-CHICAGO DO NOT MAIL Chicago, IL 60604 US
• Name: Army Applicant Help Desk