You will serve as a Civil Engineer (Structural) in the Engineering & Design Product Line Coordinator Department, Planning, Design, and Construction Directorate of NAVFAC ENGINEERING CMD MID-ATLANTIC. This position serves as a consultant and technical expert concerning Antiterrorism/Force Protection (ATFP) and Physical Security Equipment (PSE) for the region.

Duties

You will be the Command's Subject Matter Expert (SME) for all facilities for ATFP and threats to life and safety within the NAVFAC Mid-Atlantic area of responsibility (AOC). You will direct and coordinate all activities in the technical guidance and design of facilities for compatibility with ATFP measures and blast load conditions of facilities within the NAVFAC Mid-Atlantic AOC. You will review or direct the review of new and revised criteria as well as structural engineering features of plans, specifications and design computations as submitted by the subordinate offices within the AOC and architect-engineers. You will provide statements of work, cost estimates, and field verification for all ATFP/PSE related aspects. You will conduct field inspections of proposed projects to determine design requirements; inspecting projects under construction to determine the adequacy of design and to assure conformance to plans and specifications.

Requirements

• Must be a US Citizen.
• Must be determined suitable for federal employment.
• Must participate in the direct deposit pay program.
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
• Generally, current federal employees applying for GS jobs must serve at least one year at the next lower grade level. This requirement is called time-in-grade. Time-in-grade requirements must be met by the closing date of this announcement.
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
• Males born after 12-31-59 must be registered for Selective Service.
• You will be required to obtain and maintain a current valid United States driver’s license.
• You will be required to obtain and maintain an interim and/or final secret security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
• This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). Certification in the Acquisition Functional Area and category assigned to the position is required within established category timeframes.
• You will be required to complete training, obtain, and maintain a government credit card for travel and travel-related purchases.
• This position may require occasional travel from normal duty station. You must be able to travel on military and commercial aircraft.
• You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes when making site visits, as determined by site conditions and applicable safety regulations.
• This position requires current registration as a Professional Engineer (PE) from any state, the District of Columbia, Guam or Puerto Rico. You must provide a copy of your current registration with your application.

Qualifications

Selective Placement Factor (SPF): This position has an SPF which is current registration as a Professional Engineer (PE) from any state, the District of Columbia, Guam or Puerto Rico. If you meet this requirement, you must provide a copy of your current registration with your application. In addition to the basic requirements and SPF, your resume must demonstrate at least one year of specialized experience at or equivalent to the GS-12 grade level or pay band in the Federal service or equivalent experience in the private or public sector performing the following duties: 1) Coordinating activities in the technical guidance and design of facilities for compatibility with Antiterrorism/Force Protection (ATFP) measures and blast load conditions of facilities; 2) Serving as consultant and technical specialist for Antiterrorism/Force Protection (ATFP); 3) Providing statement of work, cost estimates, and field verification for all ATFP related aspects; and 4) Conducting field inspections of proposed projects to determine design requirements; inspect projects under construction to determine the adequacy of design and to assure conformance to plans and specifications. Additional qualification information can be found from the following Office of Personnel Management website: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series AND https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

Education

Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:

Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.

OR

Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org

OR

Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html.

OR

Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above)

OR

Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

Contacts

• Address NAVFAC ENGINEERING CMD MID-ATLANTIC 9324 Virginia Ave Norfolk, VA 23511 US
• Name: Department of Navy EIC
• Email: [email protected]