About the Position: You will serve as Resident Engineer, designated as Administrative Contracting Officer and Contracting Officer's Representative, with responsibility for monitoring and controlling the full range of construction activities on Malmstrom AFB. Types of construction can also include the full range of Civil Works, Military Construction, Sustainment, Rehabilitation, Maintenance, and work for others.

Duties

Plans, organizes, directs, coordinates, schedules, and reviews the full rate of Resident Office activities carried out at Malmstrom AFB. Interpret agency policies, regulations, standards, and procedures and give advice and counsel to employees on technical work and administrative matters. Plan work to be accomplished including establishment of specific objectives, priorities, and preparation of schedules for completion of work. Collaborate with program and project managers, to negotiate, decide on, and/or coordinate work-related changes affecting other elements. Conducts and/or participates in meetings and conferences related to Resident Office activities. Keeps various stakeholders up to date on current activities. Directly manages a staff of professional and technical personnel.

Requirements

• Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
• Obtain and maintain a SECRET security clearance.
• Obtain and maintain an Administrative Contracting Warrant (ACO) at the $500,000 level or higher within 36 months of appointment.

Qualifications

Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities. Current Department of Army Civilian EmployeesCurrent Department of Defense (DOD) Civilian Employee (non-Army)Domestic Defense Industrial Base/Major Range and Test Facilities Base Civilian Personnel WorkforceExecutive Order (E.O.) 12721Interagency Career Transition Assistance PlanLand Management Workforce Flexibility ActMilitary Spouses, under Executive Order (E.O.) 13473Non-Department of Defense (DoD) TransferOffice of Personnel Management (OPM) Interchange Agreement EligiblePeople with Disabilities, Schedule APriority Placement Program, DoD Military Spouse Preference (MSP) EligibleReinstatementVeterans Employment Opportunity Act (VEOA) of 1998 In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Basic Requirement for Architect: Degree: Bachelor's degree (or higher) in architecture or in a related field that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following: structural technology, properties of materials and methods of construction, and environmental control systems. OR Combination of Education and Experience. Please see the Individual Occupational Requirements on OPM: Basic Requirements for Architect for the full list. Basic Requirement Civil, Mechanical and Electrical Engineer: A. Degree: Bachelor's degree (or higher) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. 3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. 4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: Specialized Experience: One year of specialized experience which includes experience with engineering or architect principles and practices related to the construction of military and Interagency and International Services (IIS) facilities and infrastructure; application of a broad range of environmental principles in accomplishing the construction mission; and applying construction contracting procedures and contract administration. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-13). Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted. SELECTIVE PLACEMENT FACTOR: This position requires current registration as a Professional Engineer (PE) or professional architect (Registered Architect/RA) in a state, the District of Columbia, or a territory of the United States. (You must upload a copy of the current PE or RA License with your application.) You will be evaluated on the basis of your level of competency in the following areas: CommunicationsConstruction ManagementLeadershipProject Management Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-13).

Education

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: http://www.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html

Contacts

• Address HF-APF-W07102 US ARMY ENGINEER DISTRICT, SEATTLE DO NOT MAIL Seattle, WA 98134 US
• Name: Army Applicant Help Desk