About the Position: General Engineer, with the U.S. Army Aviation and Missile Command, U.S.Army TMDE Activity (USATA), Enterprise Support Directorate, Physical Measurements Division. Redstone Arsenal, AL.

Duties

Perform developmental studies to define concepts and criteria for future measurement systems and/or resolve major controversial problems in present systems. Provide engineering support through specialized efforts and collaboration with National Institute of Standards and Technology (NIST), leading manufacturers, and universities. Design and Develop very complex/unique components used in various measurement systems requiring highly specialized knowledge and abilities in physical metrology and calibration. Provide Test, Measurement, and Diagnostic Equipment (TMDE) support for metrology, calibration, and testing requirements to an Enterprise with a global presence. Serve as project leader and technical expert with responsibilities for major assignments covering requirements regarding metrology, calibration, and testing of test, measurement, and diagnostic equipment (TMDE), and standards.

Requirements

• Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
• Obtain and maintain a Secret Security Clearance
• This position requires certification in Career Category Engineering, Level III Within 24 months.
• This positional requires occasional travel (TDY).

Qualifications

Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities. Current Department of Army Civilian EmployeesCurrent Department of Defense (DOD) Civilian Employee (non-Army)Defense Civilian Intelligence Personnel System (DCIPS) Interchange AgreementExecutive Order (E.O.) 12721Interagency Career Transition Assistance PlanLand Management Workforce Flexibility ActMilitary Spouses, under Executive Order (E.O.) 13473Priority Placement Program, DoD Military Spouse Preference (MSP) EligibleVeterans Employment Opportunity Act (VEOA) of 1998 In order to qualify, you must meet the education/experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Basic Requirement for [General Engineer]: A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. 3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: Specialized Experience: One year of specialized experience for the GS-12 which includes; Experience in the measurement areas of mechanics, heat, light, sound, optics, radiation and practices. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-11). Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted. Specialized Experience: One year of specialized experience for the GS-13 which includes; Experience in the measurement areas including mass, force torque, pressure gas flow principles; knowledge of general engineering principles, techniques and practices. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-12). Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted. You will be evaluated on the basis of your level of competency in the following areas: Engineering and TechnologyMeasurement and InstrumentationProblem SolvingProject ManagementTechnical Competence Time in Grade Requirement for the GS-12: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-11). Time in Grade Requirement for the GS-13 Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-12).

Education

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: http://www.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html.

Contacts

• Address AD-APF-W1PLAA USA, AMCOM TMDE ACTIVITY DO NOT MAIL Redstone Arsenal, AL 35898 US
• Name: Army Applicant Help Desk