Over 1 Million Paying Vacancies Available. Discover Your Dream Vacancy with Us!

Are you looking for a ELECTRONIC MEASUREMENT EQUIPMENT MECHANIC? We suggest you consider a direct vacancy at Army National Guard Units in Helena. The page displays the terms, salary level, and employer contacts Army National Guard Units person

Job opening: ELECTRONIC MEASUREMENT EQUIPMENT MECHANIC

Salary: $36 - 42 per hour
City: Helena
Published at: Sep 26 2023
Employment Type: Full-time
THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE BARGAINING UNIT INDEFINITE w/ possible permanent status POSITION. This National Guard position is for an ELECTRONIC MEASUREMENT EQUIPMENT MECHANIC, Position Description Number D1201000 and is part of the Montana Army National Guard, G4 - CSMS. (A copy of the Position Description can be obtained from HRO upon request.) Selecting Official: CW4 James Dauenhauer

Duties

This position is located in the Joint Forces Headquarters-State, Logistics Directorate (J-4), Surface Maintenance Facility. The primary purpose of this position is to perform calibration, diagnostics repair, and certification of electronic, mechanical, and radiation Test Measurement and Diagnostic Equipment (TMDE). Calibrates and repairs TMDE within support capability and authority including various levels of calibration as designated in technical bulletins, manuals, etc. Performs functional electronic, physical, and radioactive testing involving interpretation and analysis of measurement data, in accordance with cyclic inspection requirements. Aligns, troubleshoots, tests, inspects, repairs, modifies, calibrates and certifies precision measurement equipment such as multimeters, microwave equipment, oscilloscopes, temperature analyzers, mercurial barometers, gage blocks and micrometer caliper dimensional equipment, digital voltmeters, signal generators, torque wrenches, pressure gauges, torque testers, weight scales, electronic counters, radiation monitors, radix calibrators, and radiation dosimeters. Analyzes and isolates component malfunctions; calculates and determines tolerances; and performs tests and calibrations in accordance with instructions, which are often vague and incomplete, and may require the preparation of diagrams and instructions to facilitate the calibration action. Sets up system test sets and various types of test equipment such as frequency meters, standing wave ratio meters, radio frequency (RF) power meters, function/ arbitrary waveform generator, distortion analyzers, time frequency work stations, oscillators, voltmeters, electronic counters, oscilloscopes, attenuators, decade resistors and capacitors, signal generators, stroboscope, tachometers, pneumatic and hydraulic pressure standards and other physical and electronic tests. Diagnoses equipment, makes repairs, and replaces defective parts/components such as integrated circuits, printed circuit boards, electronic condition coils, radiation detector boards/circuits, crystals, transistors, tubes, transformers, condensers, diodes, relays potentiometers, and related components. Following repair, tests by applying signals in known amplitude and wave shape into oscilloscopes to observe wave pattern. Isolates faults by taking measurements and comparisons in voltage, amperage, ohms, henries, power factor, watts, temperature, humidity, microns, foot-pounds, decibels, sensitivity, noise, stability, Voltage Standard Wave Ratio (VSWR), impedance, phase, absolute pressure, time intervals, displacement, flow rate, etc., to determine performance of equipment. If signal is distorted, traces it through electronic stages to locate malfunctioning part. Checks sweep rate by feeding known signal to an oscilloscope and observing wave pattern to correct shape and size. Operates equipment to complete range checking for proper operation of positioning controls. Adjusts with trimmer potentiometers; and if calibration is still not possible, adds or removes sufficient resistance to permit balancing of circuit. As needed, contacts the using organization to obtain information concerning the nature of the malfunction. Uses equipment schematics to analyze circuits by preparing block diagram showing major components such as amplifiers, filters, oscillators and indicators. Determines purpose in operation characteristics of each major section. Refers to technical manuals and manufactures specifications to obtain information on operation characteristics of circuit components such as integrated circuits, microprocessors, decoders, latching networks, notch filters, logics, controllers, programmable gain amplifiers, digital displays, transistors, tubes, transformers, coils, relays, motors, and similar devices. Disassembles, cleans and inspects parts such as printed circuit boards, resistors, capacitors, integrated circuits, relays, chambers, cables, and wiring for evidence or wear or malfunction. Repairs and/or replaces parts as required. Uses special test devices and radioactive samples or other calibrated sources. Tests equipment for sensitivity and correct operation. Observes necessary precautions as stipulated in operational repair manuals. Makes radiation calculations/readings at various distances from the standard ensuring radiation equipment is operating in specified parameters. Performs contamination/radiation surveys on radiation equipment to control/eliminate radiation leakage/contamination. Completes necessary Army Maintenance Management System (TAMMS), calibration, radiation reports and other records and forms on work completed. Ensures maximum number of weapons systems are operationally ready. Follows appropriate safety procedures, with special care being exercised while calibrating high voltage, radio frequency, radioactive sources and high-pressure instruments and gages.

Requirements

  • NATIONAL GUARD MEMBERSHIP IS REQUIRED. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position.
  • This is an excepted service position that requires membership in the employing state's National Guard, required prior to the effective date of placement.
  • Selectee will be required to wear the military uniform.
  • Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment.
  • Applicants who are not currently a member of the National Guard must be eligible for immediate membership and employment in the National Guard in the military grade listed in this announcement.
  • Males born after 31 December 1959 must be registered for Selective Service.
  • Federal employment suitability as determined by a background investigation.
  • May be required to successfully complete a probationary period.
  • Participation in direct deposit is mandatory.
  • Appointments in the Title 32 MTNG technician program may terminate/suspend your military incentives; please see your MTNG Retention Office/Military Personnel Incentive Program Manager for details.
  • Must be able to obtain and maintain the appropriate security clearance of the position.
  • External applicants must be able to start within 6 months of selection.

Qualifications

Military Grades: E5 - E8 GENERAL EXPERIENCE: Must possess experience or training which demonstrates a working knowledge of electronic principles involved in the generation and measurement of such elements as voltage, current, impedance, capacitance, frequency, and inductance. Experience in the use of various precision measurement instruments and standards. SPECIALIZED EXPERIENCE: Must possess at least 18 months experience or training with basic application of operating principles such as the production and utilization of oscillations over a broad range of frequencies; signal and waveform behavior, distortion, and amplification; pulse, trigger, and synchronization techniques; digital/analog processing and data conversion techniques; and a variety of display and indication methods. Experience in tracing signals and voltage paths, and skilled in the analysis of waveform characteristics such as timing, duration, frequency, and phasing. Originates test set-ups to isolate malfunctions and check performance characteristics of special or unique test panels or mockups. Experience in interpreting and applying a variety of technical electronic information such as schematic symbols, mathematical expressions and formulas, calibration procedures, and other reference materials. Experience in applying established techniques and methods of repair, testing, alignment, and calibration of equipment, which serves as test equipment or precision measurement standards. Experience in utilizing electronic circuits to measure electronic or electrical quantities to determine the performance characteristics and accuracy of other instruments and equipment. PLACEMENT STATUS/TENURE OF SELECTEE: TEMPORARY PROMOTION/REASSIGNMENT/CHANGE TO LOWER GRADE - For Title 32 permanent selectees only: This is an obligated position. If a permanent employee in the Title 32 Excepted civil service accepts this position, he/she will retain their permanent status AND have rights to return to their previous Title 32 position. TEMPORARY PROMOTION/REASSIGNMENT/CHANGE TO LOWER GRADE - For Title 32 Indefinite selectees only: This is an obligated position. If an indefinite employee (tenure 3) in the Title 32 Excepted civil service accepts this position, he/she will retain their indefinite status AND may return to their previous Title 32 indefinite position if it is still available. INDEFINITE APPOINTMENT - For Current Title 5 selectees only: This is an obligated position. If an on-board employee in the Title 5 excepted civil service accepts this position, he/she will convert to a T32 indefinite appointment (tenure 3). This employee will have no reemployment rights to their previous T5 position. INDEFINITE APPOINTMENT - State National Guard Members (includes T32 NTE employees and MTNG members not currently a federal employee): This is an obligated position. Selectee will be appointed as an indefinite employee (tenure 3).

Education

This job does not have an education qualification requirement.

Contacts

  • Address MT J4 1956 Mt Majo Street Fort Harrison, MT 59636-4789 US
  • Name: Jessica Wharton
  • Email: [email protected]

Map