This is a public notice flyer to notify interested applicants of anticipated vacancies. Applications will NOT be accepted through this flyer. Interested applicants should review the "How to Apply" section of this flyer for more information on how to be considered. This flyer will be used as positions become available. There may or may not be actual vacancies filled from this flyer.

Duties

Perform or direct the survey and investigations at the project site to determine condition of facilities and to secure necessary data prior to initiating design. Evaluate the data obtained and incorporates the salient factors into design considerations and solutions. Coordinate with other engineers and architects in design development to ensure that all technical areas are covered. Ensure areas of overlapping responsibilities between technical disciplines receive proper design consideration and that the total project objectives and schedules are met. Evaluate design objectives, perform complex technical calculations, and identify the most economical and efficient procedures for project design and performance. Prepare detailed cost estimates for use in obtaining project funding and bid evaluation. Prepare correspondence, technical reports, estimates, fact sheets, status reports and schedules as required to complete project assignments. Consult with construction contractor personnel to resolve difficult and complex unforeseen problems and latent conditions developing during construction. Prepare sketches or change drawings and specifications to solve problem and incorporates these changes into the contract performance documents. Review and evaluate shop drawings, samples and material certifications sub-mitted by contractor for contract and performance requirements. Review the work of architect-engineer firms to ensure design excellence and requirements are met.

Requirements

• Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
• Secret Security Clearance is required.
• One year probationary period may be required.
• Incumbent is required to submit a Confidential Financial Disclosure Report, OGE-450 upon entering the position and annually,

Qualifications

Who May Apply: US Citizens In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Basic Requirement for Mechanical Engineer (GS-0830)A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. In addition to meeting one of the basic requirements above, to qualify for this position you must also meet the specialized experience qualification requirements for the different levels listed below: GS12one year of specialized experience equivalent to at least the GS-11 grade level in the Federal service which includes responsibility for developing the designs, plans, and specifications for plumbing, heating, ventilating, air conditioning and other systems of major size; prepare drawings and specifications for private architect-engineering contracts; review contractor's designs; and serve as a technical advisor to lower grade engineers on complex design problems. At the GS12 grade level education CANNOT be a substitute for experience.

Education

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: http://www.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html

Contacts

• Address BK-APF-W0WFAA US ARMY GARRISON REDSTONE DO NOT MAIL Redstone Arsenal, AL 35898 US
• Name: IMCOM DPW
• Email: [email protected]