You will serve as a Electrical Engineer in the Capital Improvements Division of NAV FACILITIES ENGINEERING COMMAND SE. This position at NAVFAC Southeast, advances your career in a challenging, yet flexible environment where YOU truly make a difference! Be part of an organization that values YOUR unique skillset, fosters YOUR professional development, and gives YOU the opportunity to grow into tomorrow's leader. You don't need to be active duty military to serve your country!

Duties

You will prepare electrical design drawings, calculations, and specifications to accompany design models generated on electrical engineering design software (e.g., AutoCAD). You will develop project plans (e.g., engineering design and construction project) to include work requirements, resource needs, execution schedules and acquisition plans. You will investigate problems (e.g., change in design and interface) with existing structures to ensure construction is compatible with the organizational plan. You will draft correspondence concerning contractor furnished material and equipment to ensure compliance with contract specifications.

Requirements

• Must be a US Citizen.
• Must be determined suitable for federal employment.
• Must participate in the direct deposit pay program.
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
• Generally, current federal employees applying for GS jobs must serve at least one year at the next lower grade level. This requirement is called time-in-grade. Time-in-grade requirements must be met by the closing date of this announcement.
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
• Males born after 12-31-59 must be registered for Selective Service.
• This position requires a current Professional Engineer (PE) registration from any state, the District of Columbia, Guam or Puerto Rico. You must provide a copy of your current registration with your application.
• This position may require occasional travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
• You will be required to obtain and maintain an interim and/or final secret security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
• You will be required to complete ethics orientation within three months of appointment and submit a Confidential Financial Disclosure Report, OGE-450, within 30 days of appointment.
• This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). Certification in the Acquisition Functional Area and category assigned to the position is required within established category timeframes.
• You will be required to complete training, obtain, and maintain a government credit card for travel and travel-related purchases.

Qualifications

This position has a Selective Placement Factor (SPF) which is current registration as a Professional Engineer (PE) from any state, the District of Columbia, Guam or Puerto Rico. Note - if you meet this requirement, you must provide a copy of your current registration with your application. I have one year of specialized experience equivalent to the next lower grade level (GS-12) or pay band in the federal service or equivalent experience in the private or public sector performing duties such as: 1) Independently developing and producing-in accordance with applicable laws, Codes, Standards, and project objectives and requirements-project electrical designs and construction documents (Drawings and Specifications)-using a variety of computer software-for construction new facilities and for renovation of existing facilities for the DoD and for other Government agencies; 2) Preparing field surveys documenting existing electrical systems and existing site conditions; 3) Performing forensic site investigations and preparing written, technical documentation; 4) Performing complex calculations-using computer software or hand-calculations-for design and analysis of electrical systems (for example, lighting illuminance, voltage drop, etc.) and equipment and for production and preparation of electrical studies (such as, load-flow, fault, load demand, load level forecasts, etc.) and engineering reports; 5) Analyzing and evaluating electrical systems and equipment (for example, sizing MV power transformers, utility substation bus sizing, conductor sizing, raceway sizing, etc.) in support of construction and in comparing design alternatives with respect to efficiency, energy savings, constructability, future expandability, and costs; 6) Providing engineering cost estimates to provide a baseline for probable construction costs; 7) Analyzing and interpreting contract drawings and specifications to determine the extent of the contractor's responsibility under the provisions of the contract; 8) Providing technical support during construction with regard to problems arising from unforeseen conditions, design errors, construction errors, interfacing new work with existing work, etc. Additional qualification information can be found from the following Office of Personnel Management website: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series AND https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

Education

Applicants must meet the following positive education qualifications requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:

Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.

OR

Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org

OR

Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html.

OR

Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above)

OR

Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

Contacts

• Address NAV FACILITIES ENGINEERING COMMAND SE Naval Air Station Bldg 903 PO Box 30 Jacksonville, FL 32212-0030 US
• Name: Department of Navy EIC
• Email: [email protected]