About the Position: This is a Direct Hire Authority (DHA) solicitation utilizing the DHA for Certain Personnel of DoD Workforce to recruit and appoint qualified candidates to positions in the competitive service. This is an interdisciplinary position and can be filled under any of the following occupational series. General Engineer, 0801 Architect, 0808 Civil Engineer, 0810 Environmental Engineer, 0819 Mechanical Engineer, 0830 Electrical Engineer, 0850

Duties

Responsible for thorough implementation of the government Quality Assurance (QA) Program, conducting QA/QC Coordination meetings. Review of quality control plans and procedures and assessments of contractor performance through regular field surveillance and daily documentation procedures. Perform construction tasks in accordance with District Project Management Business Process (PMBP) matrices for Military Construction (MILCON), environmental, and civil works projects and agency policy. Obtain timely and cost effective projects through proper contract administration in accordance with contract requirements and Resident Office policies and procedures. Review and analyze proposals submitted by contractors, installation personnel, and agencies for changes to contract plans and specifications. Monitor funds available on contracts and contract line items and advise project personnel on same.

Requirements

• Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
• Submission of a Financial Disclosure, OGE-450, prior to appointment and annually thereafter.
• Obtain Contracting Officer's Representative qualification within one year of hire.
• This position requires spending a considerable portion of time working outdoors in all types of weather including extreme temperatures, river conditions, and is subject to injury from the use of a variety of tools, as well as, wet working surfaces.
• This position may require a Hazardous Toxic and Radiological Waste (HTRW) physical examination pending job requirements.
• This is an Acquisition Position: Must be able to obtain DAWIA certificate in Contracting within 2 years of hire.
• Possess or obtain and maintain a valid, State-issued motor vehicles driver?s license.
• Business travel is 50% of the time annually.
• This position has been designated "Mission Essential".
• In the event of severe weather conditions or other such emergency type situations (natural or man-made disaster) the incumbent is required to report to work or remain at work as scheduled to support mission operations.

Qualifications

Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities. In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Basic Requirement for General/Civil/Environmental/Mechanical/Electrical Engineer: A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. 3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. 4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. Basic Requirement for Architect: A. Degree: Bachelor's degree (or higher degree) in architecture or in a related field that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following: structural technology, properties of materials and methods of construction, and environmental control systems. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildings. The adequacy of such background must be demonstrated by at least one of the following: (1) Related Curriculum - Degree in architectural engineering provided the completed course work in architectural engineering provided knowledge, skills, and abilities substantially equivalent to those provided in the courses specified in statement A above, or (2) Experience: 1 year of experience in an architect's office or in architectural work for each year short of graduation from a program of study in architecture. In the absence of any college courses, 5 years of such experience is required. This experience must have demonstrated that you have acquired a thorough knowledge of the fundamental principles and theories of professional architecture. In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: GS-11 Specialized Experience: One year of specialized experience which includes: 1) Reviewing a variety of data or reports (i.e. designs, shop drawings, daily reports, etc.); 2) Conducting field inspections of construction projects to ensure compliance with contract documents; and 3) Tracking project funds and/or expenditures. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-09) NOTE: Please see "Education" section below. GS-12 Specialized Experience: One year of specialized experience which includes: 1) Preparing contractor submittals, such as shop drawings, samples and data for compliance with contract documents; 2) Conducting field surveillance to assess contractor's work performance; 3) Recommend necessary changes or improvements to construction designs and/or specifications; and 4) Participating in contract negotiations and /or meetings. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-11). DESCRIBING YOUR EXPERIENCE: PLEASE BE CLEAR AND SPECIFIC. WE WILL NOT MAKE ASSUMPTIONS REGARDING YOUR EXPERIENCE. All answers provided in the on-line process must be substantiated by a resume. If, upon review, it is determined that your resume and/or supporting documents do not support your answer choices, your application may be removed from consideration.

Education

Education Substitution For Specialized Experience

GS-11:

Education: Ph.D. or equivalent doctoral degree or 3 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: Engineering.

OR

Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the second year (total graduate semester hours minus 36) by 18. Add the two percentages.

GS-12: Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted.

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: http://www.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html

GS-11 Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-09).

GS-12 Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-11).

Contacts

• Address FS-APF-W2SD02 US ARMY ENGINEER DISTRICT, NEW YORK DO NOT MAIL New York, NY 10278 US
• Name: Army Applicant Help Desk