THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION. This National Guard position is for a Electronic Integrated Systems Mechanic (Title 32) (Permanent), Position Description Number D2325000 and is part of the VA 192 AMX SQ, National Guard.

Duties

As an Electronic Intergrated Systems Mechanic (Title 32), WG-2610-12, you will perform the below duties: 1. Performs scheduled and unscheduled maintenance on one or more multi-complex electronic integrated systems. Completes operational checks, inspections, tests, trouble shooting, removal and replacement of Line Replaceable Units (LRUs) which are linked with integrated systems and LRUs which are independent or associated with nonintegrated systems. Isolates unusual malfunctions using technical orders, schematics, wiring diagrams, tools, and test equipment including automatic test equipment and Flight Line Test Systems (FLTS). Solves complex problems by analyzing installation, circuitry, and operating characteristics of the systems. Adjusts and aligns system sensors, transmitters, amplifiers, power supplies, display devices, controls, transponders, actuators, servos, computers and other related components. Installs serviceable components into aircraft and performs total systems alignment and harmonization in accordance with existing technical orders and directives. Accomplishes technical order compliances, modification of components/systems and completes thorough system checks for proper operation. 2. Reviews and analyzes maintenance data; determines if criteria are sufficient to provide adequate test, troubleshooting and repair procedures; devises and recommends tests, procedural changes, or data corrections. Aligns, adjusts, and performs final calibrations on integrated systems to determine successful repairs. Analyzes equipment failure and malfunctions and suggests changes to improve operation. Monitors the operation of complex, interrelated systems, analyzes operating trends, proposes preventative maintenance down time to assure continued operating capability, and recommends components for overhaul or engineering evaluation for disposal. 3. Troubleshoots operational malfunctions and analyzes system performance utilizing aircrew debrief data, Technical Orders, schematic and wiring diagrams, engineering drawings, data analysis, common and system-specific test equipment and built in system tests. Performs on and off-equipment maintenance on aircraft avionics such as automatic flight control systems, instrument systems, communication and navigation systems, and inertial navigations systems. Coordinates back shop bench check completes testing, repair, inspection, modification, programming, reprogramming, mating, adjusting, alignment, and analyzing of LRUs and shop replaceable units (SRUs). Uses a variety of test equipment such as automatic test equipment (ATE), oscilloscopes, frequency counters, phase-angle voltmeters, optical alignment equipment, digital pitot-static testers, programming units and special purpose test analyzers. 4. Recommends methods to improve equipment performance, technical data, and maintenance procedures by reporting hardware and software malfunctions, initiates material deficiency reports both on equipment and in technical data and assists in design changes as necessary. Documents all discrepancies and maintenance actions performed by inputting information into the electronic records information systems (i.e.: CAMS, IMDS, GO-81, REMIS). Recommends hardware and software changes. Submits change recommendations to Technical Orders. Requisitions supply assets and processes repairable assets in accordance with Standard Base Supply System requirements. Documents maintenance actions in aircraft forms and documents man-hour expenditures and maintenance actions in the maintenance computer system. 5. May upload/download chaff/flare dispensers. This hazardous task may involve the inspection, storage and handling of explosive devices; to include flares, chaff, impulse cartridges and similar items. Prepares for and participates in Aerospace Expeditionary Force (AEF) tasking, deployments and various inspections and exercises. Processes and accounts for due-in from maintenance (DIFM) supply assets. Ensures that material and equipment are properly stored, protected and maintained and that funds are not obligated for material or parts without proper justification. 6. May be required to perform additional duties such as structural fire-fighting, aircraft fire/crash/rescue duty, serve as a security guard, remove snow, load and handle munitions, launch/recover and service aircraft, operate heavy equipment, maintain facilities and equipment, or serve as a member of a team to cope with natural disasters or civil emergencies. Complies with safety, fire, security, and housekeeping regulations. 7. Performs other duties as assigned.

Requirements

• NATIONAL GUARD MEMBERSHIP IS REQUIRED. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position.
• This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard, required prior to the effective date of placement.
• Selectee will be required to wear the military uniform.
• Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment.
• Applicants who are not currently a member of the National Guard must be eligible for immediate membership and employment in the National Guard in the military grade listed in this announcement.
• Males born after 31 December 1959 must be registered for Selective Service.
• Federal employment suitability as determined by a background investigation.
• May be required to successfully complete a probationary period.
• Participation in direct deposit is mandatory.
• This position is located at a bargaining unit and eligible for union representation through Chapter 49 of the Association of Civilian Technicians.

Qualifications

NOTE: Qualifications are based on breadth/level of experience. In addition to describing duties performed, applicants must provide the exact dates of each period of employment (from MM/DD/YY to MM/DD/YY) and the number of hours worked per week if part time. As qualification determinations cannot be made when resumes do not include the required information, failure to provide this information may result in disqualification. Applicants are encouraged to use the USAJOBS Resume Builder to develop their federal resume. For a brief video on How to Create a Federal. WHO CAN APPLY: GROUP I - All qualified Male/Female Enlisted Member (E3/A1C-E6/TSgt) currently employed (permanent) in the Virginia Air National Guard Military Technician Program. GROUP II - All qualified Virginia Air National Guard Male/Female Enlisted Member (E3/A1C-E6/TSgt) regardless of employment status (Traditional, Military Technician or AGR). To be considered as a Group II applicant, proof of appointment/enlistment in the Virginia National Guard must be attached if the appointment/enlistment occurred within 60 days prior to, or during, the advertisement period. GROUP III - Individuals eligible for membership in the Virginia Air National Guard. Military Grades: Enlisted Member (E3/A1C-E6/TSgt) GENERAL EXPERIENCE: Applicant must have experience installing, modifying, overhauling, maintaining, troubleshooting, repairing, aligning, calibrating, and rebuilding multi-system avionics complexes consisting of multiple completely integrated electronic avionics systems where the complex accomplishes a number of major functions. SPECIALIZED EXPERIENCE: Applicant must have at least 36 months of specialized experience, equivalent to at least the GS-11 level, or equivalent pay band in other pay systems in the Federal government? This experience may also have been obtained in the private sector but must demonstrate that it is comparable to the GS grade indicated. This experience must include activities such as: Experience performing scheduled and unscheduled maintenance on one or more multi-complex electronic integrated systems. Experience reviewing and analyzing maintenance data; determines if criteria are sufficient to provide adequate test, troubleshooting and repair procedures; devises and recommends tests, procedural changes, or data corrections. Experience troubleshooting operational malfunctions and analyzes system performance utilizing aircrew debrief data, Technical Orders, schematic and wiring diagrams, engineering drawings, data analysis, common and system-specific test equipment and built in system tests. Experience recommending methods to improve equipment performance, technical data, and maintenance procedures by reporting hardware and software malfunctions, initiates material deficiency reports both on equipment and in technical data and assists in design changes as necessary.

Education

Contacts

• Address VA 192 AMX SQ Joint Base Langley-Eustis Hampton, VA 23665 US
• Name: VaARNG Tech Jobs HRO
• Phone: 000000000
• Email: [email protected]