SUMMARYThe incumbent of this position is assigned to the Flight Standards Service. The incumbent is responsible for applying substantial knowledge of and experience with Title 14 of the Code of Federal Regulations (14 CFR) for the development and implementation of standards, programs, and procedures for Federal Aviation Administration (FAA) field personnel and the public governing all matters to air carrier operations safety issues.

Duties

The aviation safety inspector (ASI) receives administrative direction from management in terms of broadly defined missions or functions. The ASI, mostly independently plans, designs, and carries out programs, projects, studies, or other work. The ASI provides policy assistance to division field level ASIs on difficult or complex policy interpretations. The work is normally accepted without change. Completed work may be reviewed for adherence to FAA policy and for assurance that project requirements have been fulfilled. ASIs at the FG-13 level issue certificates to and monitor (1) a large and complex aviation organization or (2) a number of smaller organizations that, together, are comparable in complexity to one large one. They are the primary contact point with the aviation organization(s). They may decide on issuance of the original certificates. They evaluate and decide upon proposals to change the authorized programs of the organizations. They continuously monitor the activities of organizations to determine whether they are following their authorized program, Federal regulations, and good safety practices. (By comparison GS-12 employees issue certificates to small and uncomplicated organizations.) FG-13 assignments are characterized by one or more of the following: 1. Multi-engine turboprop or turbojet aircraft or the complex avionics equipment associated with such aircraft; 2. A variety of flight operations with diverse types of aircraft which may include turbine powered aircraft; or 3. Novel and complex aviation operations. (By comparison, similar assignments at the GS-12 level involve smaller turboprop or large piston-engine aircraft.) FG-13 employees plan and conduct their assignments with substantial technical independence. They receive administrative and policy guidance from their supervisors and policy makers. They also obtain technical advice from higher-level inspectors who are experts on a particular type of aircraft or who have overall program responsibility. They independently plan and carry out a work program to meet the needs and monitor the activities of the organizations for which they have certification responsibility. The scope and complexity of the work program may be such as to require the occasional assistance of other employees to conduct inspections and evaluate operations. The ASI applies a mastery knowledge level of the appropriate specialization and a broad knowledge of the line of business mission and goals to assigned programs and areas of responsibility. The ASI plans and directs the use of time and resources to accomplish organizational objectives. He or she defines, organizes, and uses resources to accomplish work activities within established schedules, analyzes program requirements and accomplishments, and makes or directs adjustments as necessary to address organizational needs. Guidelines and precedents are frequently inadequate for dealing with novel or complex operations. FG-13 employees understand and apply the basic principles of aviation safety and interpret the intent of the regulations. At FG-13, contacts are frequently with owners and top managers of aviation corporations and involve negotiating and resolving the full range of issues and problems that confront large aviation organizations. Occasionally issues are controversial, arousing considerable public interest. ASIs at the FG-13 level participate extensively in the certification inspection and surveillance of highly complex air carrier operations where principal program responsibility is vested in an aviation safety inspector of higher grade. These FG-13 employees have broad authority to negotiate with carrier management and make technical determinations within the coverage of approved specifications and policy manuals. (By comparison, GS-12 employees deal with highly complex aviation organizations on narrower, more specific assignments.) Performs other duties as assigned.

Requirements

• US Citizenship is required.
• Selective Service Registration is required for males born after 12/31/1959.
• Must submit an SF50 (See Required Documents)
• This position requires frequent travel.
• Valid state driver's license is required.

Qualifications

General Requirements for All Positions:Not more than two separate incidents involving Federal aviation regulations violations in the last 5 years;Valid State driver's license;Fluency in the English language;No chemical dependencies or drug abuse that could interfere with job performance; andHigh school diploma or equivalent.Medical Requirements for All Positions:Applicants must be physically able to perform the duties of the Aviation Safety Inspector position in a safe and efficient manner, and must meet all of the following requirements:Have good distant vision in each eye and be able to read printed materials the size of typewritten characters (glasses and contact lenses permitted) without strain;Have the ability to hear the conversational voice (hearing aid permitted);Not have any physical condition that would cause them to be a hazard to themselves or others or that would interfere with their ability to fly as passengers in a variety of aircraft.In addition, applicants for positions that require participation in the operation of aircraft must:Possess a valid second-class medical certificate in accordance with Federal Aviation Agency (FAA) regulations; andPass recurrent medical examinations as prescribed by the FAA.Applicants not requiring valid second-class medical certificates who are tentatively selected will be required to:Provide documentation from a board-certified physician certifying that they meet the minimal medical requirements; orIndividuals who do not meet the minimum medical requirements but who are otherwise qualified will receive an individualized assessment to determine whether they can perform the essential functions of the position.When the predominant work involves air carrier operations, applicants for Aviation Safety Inspector (Operations) positions must meet all of the following requirements.At least 1 year of pilot experience in multi-engine aircraft of more than 12,500 pounds maximum certificated takeoff weight;Not more than 2 flying accidents during the last 5 years in which the applicant's pilot error was involved;Professional flying skill as demonstrated in a simulator check to Airline Transport Pilot Standard.Minimum 100 flight hours during the last 3 years;Airline Transport Pilot Certificate or Commercial Pilot Certificate with instrument airplane rating (Department of Navy positions require pilot experience as demonstrated by previous ATP level performance in large multi-engine airplanes and helicopters);Possession of a valid second-class FAA medical certificate (For positions within the Department of Navy, applicants must also be physically qualified to ride as an observer aboard squadron aircraft. In addition, must also meet physical requirements to travel and lift heavy objects while performing mishap investigations); andMinimum 1,500 total flight hours.Note - Recency of specialized experience and the need for a valid second-class FAA medical certificate is waived for employees currently in the 1825 series.To qualify for this position you must demonstrate in your application that you possess at least one year of specialized experience at the FV-H, FG/GS-12 level. Specialized experience is experience that has equipped you with the particular knowledge, skills, and abilities to perform successfully the duties of the position. Specialized experience may include but not limited to conducting flight crew training and testing required by appropriate FARs, FAA-approved training programs, and current testing standards. Conducting enforcement investigations and preparing final reports and recommendations on disposition. Monitoring assigned air carrier ground and flight training.To assist in determining qualification requirements, applicants transferring between specialties at the same grade level are strongly encouraged to complete the appropriate Qualifications Assessment Tool (QAT) check sheet and upload it along with their resume. Check sheets are contained in Order 3410.26, Flight Standards Service Air Carrier and General Aviation Qualifications Assessment Tool for AFS Aviation Safety Inspectors. This order is located at: https://employees.faa.gov/org/linebusiness/avs/offices/afs/tools/qat/.

Education

Not applicable.

Contacts

• Address Federal Aviation Administration AEA Regional HR Services Branch 1 Aviation Plaza, Room 207 AHF-N610 Jamaica, NY 11434 US
• Name: Shawn Farmer
• Phone: 1 (718) 553-4175
• Email: [email protected]