About the Position: Fort Eisenhower is approximately 139 miles east of Atlanta, GA; 80 miles southwest of Columbia, SC; 156 miles west of Charleston, SC; 175 miles southwest of Charlotte, NC; and 127 miles northwest of Savannah, Georgia. Fort Eisenhower's location is in the Augusta metropolitan area (also known as the Central Savannah River Area-CSRA) and is an easy drive to Atlanta, Savannah, Charleston, Charlotte, the beaches along the Atlantic Ocean, and the mountains.

Duties

Serves as a technical authority/expert and supervisor of Operations and Maintenance (O and M) Division for the Directorate of Public Works (DPW). Responsible for providing questionable variances/ information and coordinating findings with Operations and Maintenance (O and M) Chief to adjust costs, frequencies. Manage and evaluate the Utilities Privatization (UP) program contracts within the installation. Plan the annual activities for the O and M Division to provide maintenance and repair of all the installation buildings, structures, and facilities. Responsible for the performance management of assigned personnel to include performance appraisals, employee development, and mentoring for career progression. Provides technical guidance and mentoring to Operation and Maintenance engineers utilizing their skills in the development of design and construction management. Determine the accuracy of reports, and contracts are within the policies and regulations. Identify any discrepancies within the program segments to ensure the organization goals are met.

Requirements

• Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
• This position requires a valid, State-issued motor vehicle driver's license.
• This position requires the incumbent to obtain and maintain a secret security clearance.
• This position has been designated "Mission Essential". In the event of severe weather conditions or other such emergency type situations (natural or man-made disaster) the incumbent is required to report to work or remain at work.
• This position requires the incumbent to obtain and maintain any installation and/or Department of Defense (DOD) license required to Operate light motor vehicles to and from work sites.
• The position requires TDY up to 5% of the time.

Qualifications

Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities. Current Department of Army Civilian EmployeesCurrent Department of Defense (DOD) Civilian Employee (non-Army)Defense Civilian Intelligence Personnel System (DCIPS) Interchange AgreementExecutive Order (E.O.) 12721Interagency Career Transition Assistance PlanLand Management Workforce Flexibility ActMilitary Spouses, under Executive Order (E.O.) 13473Non-Appropriated Fund Instrumentality (NAFI)Non-Department of Defense (DoD) TransferPriority Placement Program, DoD Military Spouse Preference (MSP) EligibleReinstatementVeterans Employment Opportunity Act (VEOA) of 1998 In order to qualify, you must meet the education and/or experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Basic Requirement for Supervisory General Engineer: A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. 3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. 4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: Specialized Experience: One year of specialized experience which includes experience determining major and complex budget and long-range manpower requirements for facilities maintenance repair, municipal services and energy and utilities program. Experience overseeing contractor performance and compliance of municipal services contracts to ensure appropriate actions are being performed. Experience planning work to be accomplished by subordinates, set and adjust short-term priorities, and prepare schedules for completion of work. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-13). Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted. You will be evaluated on the basis of your level of competency in the following areas: General EngineeringManages Human ResourcesPlanning and EvaluatingProblem Solving Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-13).

Education

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: http://www.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html.

Contacts

• Address DZ-APF-W6CBAA US ARMY GARRISON FT EISENHOWER DO NOT MAIL Fort Eisenhower, GA 30905 US
• Name: Army Applicant Help Desk
• Email: [email protected]