About the Position: Serves as Construction Division's Electrical Engineering expert and consultant for energy conservation, power generation, electrical systems, controls and related features for civil and military construction projects under the jurisdiction of the District.

Duties

Collaborates with the Area and Resident Engineers and establishes inspection policies for guidance to the field offices. Performs high level oversight of electrical quality assurance duties of critical projects and facilities within the District. Reviews electrical portions of construction and equipment installation to assess effectiveness of contractor field construction management. Interprets plans and specifications to determine that construction meets contract requirements. Prepares, evaluates and/or recommends approval, and defends engineering design decisions, constructions costs proposals, project scopes of work, and recommendations to contractors or other engineering activities. Reviews shop drawings and other contactor submittals for conformance to contract plans and specifications, supplier?s catalogs, and Federal specifications. Performs Internal Quality Audits to evaluate both the contractor?s quality control systems and the effectiveness of the Government?s quality assurance program. Discusses and coordinates results of audits/reviews with the Contracting Officer?s Representative, field office staff, and other government officials. Identifies and advises on both preventative and corrective actions.

Requirements

• Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
• Position requires the incumbent to possess and maintain a valid state-issued driver's license.
• Position has a Temporary Duty (TDY) requirement of up to 50% of the time.

Qualifications

Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities. Current Department of Army Civilian Employees Position may be filled as a temporary promotion not to exceed one year by a current permanent Army employee. Temporary promotions may be extended up to a maximum of five years and may be made permanent without further competition. In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Basic Requirement for Engineers: A. Degree: Bachelor's degree (or higher degree) in engineering. (NOTE: Transcripts must be submitted.) To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering (Transcripts must be submitted). The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. 3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. 4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: Specialized Experience: One year of specialized experience which includes: 1) Acting as Lead Support Engineer for preparation of plans and specifications for the electrical features of construction and renovation projects, and mentoring other support engineers to raise competency levels of electrical engineers; 2) Advising Construction Division on problems that arise during the construction process as they pertain to electrical systems/features, and making solution recommendations; 3) Preparing and reviewing designs, reviews, calculations, analysis, cost estimates, and contract specifications as they pertain to the design and installation of electrical contract features. Some federal jobs allow you to substitute your education for the required specialized experience in order to qualify. For this job, you must meet the qualification requirement using experience alone--no substitution of education for specialized experience is permitted. This position has selective placement factor which must be met prior to employment and for continued employment. Selective Placement Factors are a prerequisite to appointment and represent minimum requirements for a position. Applicants who do not meet it are ineligible for further consideration. This position requires registration or licensure in Professional Engineering. Registration may be in any state, Guam, Puerto Rico, or the District of Columbia. (NOTE: You must provide/upload your Professional License/Registration as proof of claimed registration/license. Failure to upload the required documentation will result in being found ineligible for the position.) You will be evaluated on the basis of your level of competency in the following areas: Electrical EngineeringEngineering and TechnologyStandardsTechnical Competence Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-12).

Education

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: http://www.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html

Contacts

• Address RL-W07404 US ARMY ENGINEER DISTRICT-MOBILE DO NOT MAIL Mobile, AL 36628 US
• Name: Army Applicant Help Desk