You will serve as a Civil Engineer (Structural) in the Capital Improvements, Engineering and Design, Structural Engineering of NAVAL FAC ENGINEERING CMD WASH.

Duties

You will develop or conduct development of complete working drawing and specifications for design bid build projects and development of Request for Proposal (RFP) for design build projects. You will be responsible for providing design support prior to construction award and providing the successful management of any and all post award aspects of the construction portion for the projects assigned. You will serve as part of the Source Selection Technical Evaluation Panels (TEP) supporting the acquisition process. You will develop new solutions for assigned facility projects where solutions from previous facility projects cannot be used, prove inefficient or not cost-effective. You will investigate and recommend corrective measures for difficulties or failures in existing structural conditions for Navy shore facilities.

Requirements

• Must be a US Citizen.
• Must be determined suitable for federal employment.
• Must participate in the direct deposit pay program.
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
• Generally, current federal employees applying for GS jobs must serve at least one year at the next lower grade level. This requirement is called time-in-grade. Time-in-grade requirements must be met by the closing date of this announcement.
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
• Males born after 12-31-59 must be registered for Selective Service.
• GS-13 Applicants: You will be required to obtain and maintain a current Professional Engineer license.
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
• This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). Certification in the Acquisition Functional Area and category assigned to the position is required within established category timeframes.
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
• You will be required to complete ethics orientation within three months of appointment and submit a Confidential Financial Disclosure Report, OGE-450, within 30 days of appointment.
• You will be required to complete training, obtain, and maintain a government credit card for travel and travel-related purchases.

Qualifications

The GS-13 level of this position has a selective placement factor that will be used to screen out ineligible candidates. The selective placement factor is: Current registration as a Professional Engineer by any State, the District of Columbia, Guam, or Puerto Rico is required. NOTE: YOU MUST INCLUDE A COPY OF YOUR REGISTRATION WITH YOUR APPLICATION. GS-13: Your resume must demonstrate at least one year of specialized experience at or equivalent to the GS-12 grade level or pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: 1) Preparing engineering drawings, technical specifications and studies for the structural portion of large and/or highly complex buildings (i.e., multi-story office buildings, training facilities, multi-purpose buildings, aircraft hangars, medical facilities maintenance shops, food service facilities, and/or large housing projects; 2) Resolving structural engineering construction and design issues encountered during the performance of facilities contracts; 3) Performing field investigations to verify and document existing structural conditions as a basis for the design of facility projects; 4) Reviewing facilities construction submittals for conformance to the requirements of structural engineering contract drawings / specifications. GS-12: Your resume must demonstrate at least one year of specialized experience at or equivalent to the GS-11 grade level or pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: 1) Developing structural engineering design documents, (i.e. drawings, specifications & basis of designs) for new construction and renovation projects; 2) Preparing structural engineering calculations in support of structural engineering designs for new construction and renovation projects; 3) Developing design drawings via computer aided drafting software including, but not limited to Foundation Plans, Floor and Roof Framing Plans, Elevations, Sections and Details for diverse building systems and types; and 4) Preparing statements of work and fee estimates for design projects drawing, specifications, and reports for compliance to codes and standards. Additional qualification information can be found from the following Office of Personnel Management website:https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series ANDhttps://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

Education

Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:

Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.

OR

Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org

OR

Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html.

OR

Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above)

OR

Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

Contacts

• Address NAVAL FAC ENGINEERING CMD WASH 1001 North St SE 208 Washington, DC 20020 US
• Name: Department of Navy EIC
• Email: [email protected]