Serves as project engineer for geotechnical design within Geotechnical and Dam Safety Section, Engineering Branch and analyses with broad professional knowledge and overall responsibility for the technical and administrative management for a variety of designated projects from the preliminary planning stages through the completion stages.

Duties

Perform stability, seepage, filter, settlement, and other geotechnical analyses for earthwork projects. Prepare drawings, earthwork specifications, and other design documents for geotechnical components of assigned projects. Perform routine dam and levee instrumentation reporting and inspections. Provide scoping and support Architect/Engineering contracts for subsurface drilling and geotechnical lab services. Provide consulting services to other District elements, including Project Management, as an expert in the field of geotechnical engineering, contribute to the solution of unusual and difficult soil problems.

Requirements

• Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
• The position requires the ability to obtain and maintain a valid state driver's license.

Qualifications

NOTE: THIS IS AN OPEN CONTINUOUS ANNOUNCEMENT. REFERRAL TO BE ISSUED AT MANAGEMENT REQUEST. This is a Direct Hire Authority (DHA) solicitation utilizing the DHA for certain personnel of the DOD Workforce to recruit and appoint qualified candidates to positions in the competitive service. Who May Apply: US Citizens In order to qualify, you must meet the education and/or experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Basic Requirement for Civil Engineer: A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. 3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. 4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below GS-11 Specialized Experience: One year of specialized experience which includes preparing geotechnical analysis and design; performing lab data evaluation; supporting dam and levee safety inspections and instrumentation evaluations; and supporting AE subsurface investigation and geotechnical lab contracts. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-09 or above) OR Education: Ph.D. or equivalent doctoral degree or 3 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: Civil Engineer OR Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the second year (total graduate semester hours minus 36) by 18. Add the two percentages. GS-12 Specialized Experience: One year of specialized experience which includes leading and overseeing Geotechnical analysis and design; performing lab data evaluation; leading and performing dam and levee safety inspections and instrumentation evaluations; and overseeing Architect-Engineering (AE) subsurface investigation and Geotechnical lab contracts. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-11 or above) Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted.

Education

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: http://www.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html

Contacts

• Address RL-W2SR06 US ARMY ENGINEER DISTRICT-WILMINGTON DO NOT MAIL Wilmington, NC 28402 US
• Name: Army Applicant Help Desk