This position is located with Bonneville Power Administration (BPA), in SPC Clarkston (TFSL), Spokane District (TFS), Transmission Field Services (TF), Transmission Services (T). A successful candidate in this position will serve as an Electrical Engineer in System Protection for system integration, modification, redesign, troubleshooting, installation, operation and maintenance, and failure analysis for all System Protection and Control (SPC) systems and equipment in the District.

Duties

As an Electrical Engineer, you will:

Requirements

• Must be a U.S. Citizen or National.
• This employer participates in the e-Verify program.
• Males born after 12/31/1959 must be registered for Selective Service.
• Suitable for Federal employment, as determined by a background investigation.
• May be required to successfully complete a probationary period.
• This position does not support remote work. You will be required to report physically to the official reporting worksite as specified by the supervisor, but no less than 2 days per pay period.
• This position requires a valid driver's license as a condition of employment.
• A preliminary background check must be completed before a new employee can begin work. Current Federal employees or other individuals with an existing completed background investigation may not be required to undergo another background check.
• The salary is based on a Special Rate Table, Number 0755: https://apps.opm.gov/SpecialRates/

Qualifications

BASIC REQUIREMENT: A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. -OR- B. Combination of Education and Experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: Professional Registration or Licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. -OR- Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.-OR- Specified Academic Courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.-OR- Related Curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.) For more information on how to meet the Basic Requirements please visit: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf SPECIALIZED EXPERIENCE REQUIREMENTS: GS-11: A qualified candidate's online application and resume must demonstrate at least one year of specialized experience equivalent to the next lower grade level (GS-09) in the Federal service. Specialized experience for this position is defined as: experience in participating in electrical engineering studies, analysis, and tests related to the operation, maintenance, or construction of a transmission or distribution power system. You may substitute education for specialized experience as follows: Three years of progressively higher-level graduate education leading to a Ph.D. degree, or Ph.D., or equivalent doctoral degree; your education must demonstrate the knowledge, skills, and abilities necessary to do the work. -OR- Combination of education and experience as described above. Less than one year of specialized experience may be combined with graduate education in excess of the amount required for the next lower grade level (i.e., credit hours beyond the first two years of full-time study may be credited). GS-12: A qualified candidate's online application and resume must demonstrate at least one year of specialized experience equivalent to the next lower grade level (GS-11) in the Federal service. Specialized experience for this position is defined as: experience in applying principles, concepts, and electrical engineering practices for transmission or distribution power systems related to protective relaying, metering, telemetering, alarm and data logging systems, and control schemes. There is no substitution of education for experience at the GS-12 grade level. "Experience" refers to paid and unpaid experience. Examples of qualifying unpaid experience may include: volunteer work done through National Service programs (such as Peace Corps and AmeriCorps); as well as work for other community-based philanthropic and social organizations. Volunteer work helps build critical competencies, knowledge, and skills; and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience. Physical Demands: The work requires some physical exertion, such as long periods of crouching, bending, or standing, or recurring and considerable walking, stooping, bending, and climbing in performing regular and periodic construction activities, field inspections, or to observe and study work operations. Work may also include frequent lifting of moderately heavy items weighing less than 50 pounds (i.e., 23 kilograms), such as equipment and samples. Work Environment: The work involves regular and recurring exposure to moderate risks, discomforts, and unpleasantness such as high noise levels, toxic or irritating chemicals, and adverse weather conditions at sites. Special safety precautions such as protective clothing and gear may be necessary. The employee may be required to travel approximately 1-5 days per month. Time-in-Grade: Current Federal employees must meet time-in-grade requirements by the closing date of this announcement to receive consideration. CTAP/ICTAP candidates: To be considered "well qualified" you must meet all of the requirements as described in this section. You must meet all qualifications and eligibility requirements by the closing date of this announcement.

Education

This vacancy has a positive education requirement. In order to be rated as qualified, you must provide copies of your college transcripts. Education must be obtained from an accredited institution recognized by the U.S. Department of Education. See Department of Education Accreditation Search to verify school accreditation.

Foreign education must be reviewed by an organization recognized by the U.S. Department of Education. For special instructions pertaining to foreign education and a list of organizations that can evaluate foreign education, see the Department of Education website.DO NOT email or mail in any of your application documents. Documents will not be accepted outside of the online application system.

Failure to provide copies of your college transcripts may result in a rating of "Ineligible".

Contacts

• Address Bonneville Power Administration P.O. Box 3621 Portland, OR 97208 US
• Name: Matthew Nobles
• Phone: 503-230-4634
• Email: [email protected]