You will serve as a MECHANICAL ENGINEER in the CAPITAL IMPROVEMENTS DEPARTMENT of NAVAL FAC ENGINEERING CMD WASH. This is a developmental position with a full performance level of GS-13. Applications will be accepted at the GS-12 and GS-13 grade levels.

Duties

You will develop complete working drawings and specifications for ?design bid build? projects and development of Request for Proposal (RFP) for ?design build? projects. You will be responsible for providing design support prior to construction award and providing the successful management of any and all post award aspects of the construction portion for the projects assigned. You will exercise such field supervision as is necessary to ensure that the construction program is carried to successful conclusion effectively, thoroughly, and efficiently. You will coordinate with other technical disciplines to ensure that all technical areas are covered, and that total building design objectives and schedules are met. You will serve as part of the Source Selection Technical Evaluation Panels (TEP) supporting the acquisition process.

Requirements

• Must be a US Citizen.
• Must be determined suitable for federal employment.
• Must participate in the direct deposit pay program.
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
• Generally, current federal employees applying for GS jobs must serve at least one year at the next lower grade level. This requirement is called time-in-grade. Time-in-grade requirements must be met by the closing date of this announcement.
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
• Males born after 12-31-59 must be registered for Selective Service.
• You will be required to obtain and maintain an interim and/or final secret security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
• This position may require occasional travel from normal duty station. You must be able to travel on military and commercial aircraft.
• You will be required to complete ethics orientation within three months of appointment and submit a Confidential Financial Disclosure Report, OGE-450, within 30 days of appointment.
• Occasional overtime is required but not guaranteed on a regular basis.
• If applying at the GS-13 grade level, you must have a current registration as a Professional Engineer (PE) from any state, the District of Columbia, Guam or Puerto Rico. You must provide a copy of your registration to permit verification.
• This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). Certification in the Acquisition Functional Area and category assigned to the position is required within established category timeframes.

Qualifications

This position has a Selective Placement Factor for the GS-13 grade level that will be used to screen out ineligible candidates. The selective placement factor is: Current registration as a Professional Engineer (PE) by any state in the U.S., the District of Columbia, Guam, or Puerto Rico is required. NOTE: You must submit a copy of your current registration with your application to be considered for this position GS-13: In addition to the Basic Education Requirements and SPF for this position, your resume must also demonstrate at least one year of specialized experience at or equivalent to the GS-12 grade level or pay band in the Federal service or equivalent experience in the private or public sector performing the following duties: 1) Leading production of facilities mechanical engineering design packages, including design drawings, plans, specifications and design-build requests for proposal; 2) Reviewing shore facilities mechanical engineering design submittals to provide subject matter expert acceptance recommendations to officials; 3) Providing shore facilities mechanical engineering design consultation services to officials during construction; and 4) Tracking the progress of projects to ensure that they are kept within budget and that the drawings and specifications are completed within allotted design schedules. NOTE: This experience must be fully supported by your resume. GS-12: In addition to the Basic Education Requirements for this position, your resume must also demonstrate at least one year of specialized experience at or equivalent to the GS-11 grade level or pay band in the Federal service or equivalent experience in the private or public sector performing the following duties: 1) Using Whole Building Design Guide (WBGD) and energy modeling software (i.e. Auto desk software, Microsoft Office, mechanical engineering design, analysis software) to assist with producing proposed design drawings and specifications for mechanical and utility systems; 2) Preparing calculations, cost estimates, project documents, reports, and designs for technical adequacy and sound engineering practice; 3) Presenting proposed engineering designs and plans and results of studies to upper management and project stake holders; and 4) Providing design support prior to construction award and provides the successful management of any and all post-award aspects of the construction portion for the projects assigned. NOTE: This experience must be fully supported by your resume. Additional qualification information can be found from the following Office of Personnel Management website: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series AND https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/mechanical-engineering-series-0830/ Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

Education

Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:

Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.

OR

Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org

OR

Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html.

OR

Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above)

OR

Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

Contacts

• Address NAVAL FAC ENGINEERING CMD WASH 1001 North St SE 208 Washington, DC 20020 US
• Name: Department of Navy EIC
• Email: [email protected]