About the Position: Serves as Chief, of the QA and Technical Support Section.This is an interdisciplinary position and can be filled under any of the following occupational series, depending on the qualifications of the applicant and needs of the agency: 0801- Supervisory General Engineer 0808- Supervisory Architect0810- Supervisory Civil Engineer 0819- Supervisory Environmental Engineer 0830- Supervisory Mechanical Engineer 0850- Supervisory Electrical Engineer

Duties

Direct staff in the preliminary review of plans and specifications to determine construction feasibility, logical scheduling, adequacy of detail, clarity of requirements and adequacy of quality assurance provisions. Serve as the Chief, QA and Technical Support Section responsible for providing technical support for all construction area and resident offices. Manage all projects assigned, referring to the Supervisor only those matters that impact projects outside her/his jurisdiction, requiring higher level intervention, policy formulation or matters likely to generate significant interest or controversy. Maintain close liaison with personnel in District segments and the using services to assure that procedures and policies satisfy the specific needs of these organizations. Direct and review the work of approximately 10 ( 2 Engineer GS-13; 3 Engineer GS-12; 2 Engineer GS-11; and 3 Engineering Technician GS-12 positions.)

Requirements

• Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
• Local travel (day trips to local offices) may be required.
• Must possess or be able to obtain and maintain a Certified Building Commissioning Professional (CBCP) certification within two years of acceptance of the position.
• Must possess or be able to obtain and maintain a LEED-AP certification within one year of acceptance of the position.
• This position requires the incumbent to obtain and maintain a valid, State-issued Motor Vehicle Drivers license.
• Subject to a one year supervisory probationary period unless the appointee has previously met the requirements.
• Subject to a one year probationary period unless the appointee has previously met the requirements as described in 5 CFR Part 315.
• This position requires the incumbent to submit a Financial Disclosure Statement, OGE-450, upon entering the position and annually thereafter.

Qualifications

Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities. Current Department of Army Civilian EmployeesCurrent Department of Defense (DOD) Civilian Employee (non-Army)Interagency Career Transition Assistance PlanLand Management Workforce Flexibility ActMilitary Spouses, under Executive Order (E.O.) 13473Non-Department of Defense (DoD) TransferPriority Placement Program, DoD Military Spouse Preference (MSP) EligibleReinstatementVeterans Employment Opportunity Act (VEOA) of 1998 In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid & unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) an other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. 3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. 4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. Basic Requirement for Architect: A. Degree: Bachelor's degree (or higher degree) in architecture or in a related field that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following: structural technology, properties of materials and methods of construction, and environmental control systems. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildings. The adequacy of such background must be demonstrated by at least one of the following: (1) Related Curriculum - Degree in architectural engineering provided the completed course work in architectural engineering provided knowledge, skills, and abilities substantially equivalent to those provided in the courses specified in statement A above, or (2) Experience: 1 year of experience in an architect's office or in architectural work for each year short of graduation from a program of study in architecture. In the absence of any college courses, 5 years of such experience is required. This experience must have demonstrated that you have acquired a thorough knowledge of the fundamental principles and theories of professional architecture. Selective Placement Factor: This position requires possession of a current, valid Professional Engineering (PE) or Registered Architect (RA) License in good standing issued by any one of the 50 states, or its territories. (Note: You must include a copy of your current (not just the initial Registration) Professional Engineer or Architect License/Registration showing the expiration date with your application package. Failure to include this document will result in an incomplete application and you will be given no further consideration. In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below:

Education

Specialized Experience: One year of specialized experience which includes: (1)Providing direct supervision and administration of construction contracts; (2) Exercising professional knowledge and judgment in coordination of diverse technical disciplines necessary to assess benefits, impacts, and risks of complex construction projects, including resolution of field engineering problems; (3) Managing diverse construction projects; (4) Reviewing technical adequacy of engineering documents for compliance with applicable laws, regulations, standards, and specifications..

This position has a preference factor to those with documented commissioning authority experience in at least two building projects. The experience must extend from early design phase through at least 10 months of occupancy.

This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-12).

You will be evaluated on the basis of your level of competency in the following areas:

• Contract Management
• Leadership
• Oral Communication
• Project Management
• Quality Management

Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-12).


FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: http://www.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html

Contacts

• Address FS-APF-W2SF02 US ARMY ENGINEER DISTRICT, NEW YORK DO NOT MAIL New York, NY 10278 US
• Name: Army Applicant Help Desk